#BMN1801 License Plate
2020 DODGE Durango
Tennessee, US
Rate Driver
0
0
Overview
The license plate number #BMN1801 belongs to a DODGE Durango (2020 model) and is registered in Tennessee as a multipurpose passenger vehicle (mpv) manufactured by FCA US LLC. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #BMN1801 was first searched on LookupAPlate on August 09, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
DODGE
Manufacturer Name
FCA US LLC
Model
Durango
Model Year
2020
Plant City
DETROIT
Trim
GT
Vehicle Type
MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country
UNITED STATES (USA)
Plant Company Name
Jefferson North Assembly
Plant State
MICHIGAN
Engine
Engine Number of Cylinders
6
Displacement (CC)
3600.0
Displacement (CI)
219.68547874103
Displacement (L)
3.6
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Engine Brake (hp) From
295
Engine Manufacturer
FCA
Exterior Body
Body Class
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Doors
4
Mechanical / Drivetrain
Drive Type
4x2
Exterior Dimension
Gross Vehicle Weight Rating From
Class 2E: 6,001 - 7,000 lb (2,722 - 3,175 kg)
Gross Vehicle Weight Rating To
Class 2E: 6,001 - 7,000 lb (2,722 - 3,175 kg)
Interior
Steering Location
Left-Hand Drive (LHD)
Mechanical Brake
Brake System Type
Hydraulic
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
All Rows
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
Active Belts
License Plate BMN1801
Vehicle ownership information for the 2020 DODGE Durango with license plate BMN1801 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#BMN1801. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 2 recalls
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA (20V191000)
Received on 02/04/2020
Make
DODGE
Model
DURANGO
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
Summary
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Component
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
ModelYear
2020
Conequence
The lingering rearview image can distract the driver, increasing the risk of a crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
02/04/2020
NHTSACampaignNumber
20V191000
AIR BAGS:CRITICAL FASTENERS (21V280000)
Received on 22/04/2021
Make
DODGE
Model
DURANGO
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Dealers will tighten or replace the fastener, free of charge. Owner notification letters were sent on May 7, 2021. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is Y16.
Summary
Chrysler (FCA US, LLC) is recalling certain 2020-2021 Dodge Durango vehicles. The Side Air Bag Inflatable Curtain (SABIC) fastener may be loose or missing.
Component
AIR BAGS:CRITICAL FASTENERS
ModelYear
2020
Conequence
A loose or missing fastener may cause the side curtain air bag to deploy incorrectly, increasing the risk of injury.
Manufacturer
Chrysler (FCA US, LLC)
ReportReceivedDate
22/04/2021
NHTSACampaignNumber
21V280000
If you were injured in an incident involving #BMN1801 or any other vehicle in Tennessee, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Tennessee Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process