#43GX56 License Plate
1990 FORD Crown Victoria
South Dakota, US
Rate Driver
0
0
Overview
The license plate number #43GX56 belongs to a FORD Crown Victoria (1990 model) and is registered in South Dakota as a passenger car manufactured by FORD MOTOR COMPANY OF CANADA, LTD.. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #43GX56 was first searched on LookupAPlate on May 02, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
FORD
Manufacturer Name
FORD MOTOR COMPANY OF CANADA, LTD.
Model
Crown Victoria
Model Year
1990
Plant City
TALBOTVILLE
Series
LTD Crown Victoria LX
Vehicle Type
PASSENGER CAR
Plant Country
CANADA
Plant State
ONTARIO
Engine
Engine Number of Cylinders
8
Displacement (CC)
4948.893328
Displacement (CI)
302
Displacement (L)
5.0
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Engine Brake (hp) From
150
Engine Brake (hp) To
160
Other Engine Info
Electronic Fuel Injection
Engine Manufacturer
Ford
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Front Air Bag Locations
Driver Seat Only
Passive Safety System
Seat Belt Type
Manual
License Plate 43GX56
Vehicle ownership information for the 1990 FORD Crown Victoria with license plate 43GX56 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#43GX56. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS (92V075000)
Received on 19/05/1992
Make
FORD
Model
CROWN VICTORIA
Notes
SYSTEM: REAR BRAKES.VEHICLE DESCRIPTION: PASSENGER CARS WITH 5.8 LITER ENGINES AND POLICEPERFORMANCE PACKAGES.
Remedy
REPAIR ANY BRAKE LINES THAT HAVE AN INDICATION OF CONTACT OR HAVE THE POTENTIAL FOR CONTACT WITH THE BODY OF THE VEHICLE. RELOCATE LINES, IF NECESSARY.
Summary
THE REAR BRAKE LINES HAVE INADEQUATE CLEARANCE BETWEEN THE BRAKE TUBE AND THE VEHICLE UNDERBODY IN THE AREA OF THE LEFT REAR WHEEL OPENING.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
ModelYear
1990
Conequence
INADEQUATE CLEARANCE CAN CAUSE ABRASION OF THE BRAKE LINEAND A LEAK CAN DEVELOP, RESULTING IN LOSS OF BRAKE FLUID TO THE REAR BRAKESYSTEM AND INCREASED STOPPING DISTANCES.
Manufacturer
FORD MOTOR COMPANY
NHTSAActionNumber
EA92002
ReportReceivedDate
19/05/1992
NHTSACampaignNumber
92V075000
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT (98V322000)
Received on 16/12/1998
Make
FORD
Model
CROWN VICTORIA
Notes
OWNER NOTIFICATION IS EXPECTED TO BEGIN JANUARY 18, 1999. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
DEALERS WILL REPLACE THE LOWER CONTROL ARM BALL JOINTS (2).
Summary
VEHICLE DESCRIPTION: CERTAIN 1996-1999 FORD CROWN VICTORIA POLICE, FLEET, NATURAL GAS, AND 1996-1999 LINCOLN TOWN CAR LIMOUSINE VEHICLES THAT WERE PRODUCED WITH A LOWER CONTROL ARM BALL JOINT CONTAINING A ONE PIECE BEARING; AND 1990-1996 FORD CROWN VICTORIA POLICE, FLEET, AND NGV VEHICLES AND 1990-1996 LINCOLN TOWN CAR LIMOUSINE VEHICLES THAT HAVE BEEN SERVICED WITH EITHER A BALL JOINT CONTAINING THE ONE-PIECE BEARING OR A FRONT LOWER CONTROL ARM CONTAINING A BALL JOINT WITH A ONE-PIECE BEARING. THE ONE-PIECE BEARING WITHIN THE LOWER CONTROL ARM BALL JOINT CAN WEAKEN SLOWLY DURING USE AND EVENTUALLY CRACK. THIS COULD RESULT IN SEPARATION OF THE BALL AND CAP OF THE JOINT, ALLOWING THE CONTROL ARM TO DROP TO THE GROUND.
Component
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
ModelYear
1990
Conequence
IF THIS OCCURS WHILE THE VEHICLE IS MOVING, REDUCED STEERING CONTROL COULD OCCUR, INCREASING THE RISK OF A CRASH.
Manufacturer
FORD MOTOR COMPANY
NHTSAActionNumber
PE98045
ReportReceivedDate
16/12/1998
NHTSACampaignNumber
98V322000
AIR BAGS:FRONTAL (90E043001)
Received on 30/10/1990
Make
FORD
Model
CROWN VICTORIA
Notes
NOTE: THIS CAMPAIGN WAS INITIATED BY TRW, INC., MANUFACTURER OF THE AIR BAG MODULE SYSTEM: AIR BAG MODULES. VEHICLE DESCRIPTION: PASSENGER CARS EQUIPPED WITH DRIVER SIDE SUPPLEMENTAL AIRBAG MODULES.
Remedy
REPLACE AIR BAG MODULES CONTAINING POTENTIALLY DEFECTIVE INFLATORS.
Summary
THREADED INFLATOR COMPONENTS MAY HAVE BEEN DAMAGED DURING ASSEMBLY WHICH MAY ALLOW COMPONENTS TO SEPARATE WHEN INFLATOR RECEIVES A SIGNAL TO DEPLOY THE AIR BAG.
Component
AIR BAGS:FRONTAL
ModelYear
1990
Conequence
INFLATOR COMPONENT SEPARATION ALLOWS HOT COMBUSTION GASES TO ESCAPE INTO THE PASSENGER COMPARTMENT WHICH COULD RESULT IN INJURIES TO VEHICLE OCCUPANTS.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
30/10/1990
NHTSACampaignNumber
90E043001
If you were injured in an incident involving #43GX56 or any other vehicle in South Dakota, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated South Dakota Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process