#PKM482 License Plate
2012 Nissan Altima
South Carolina, US
Rate driver
0
0
Overview
The license plate number #PKM482 belongs to a Nissan Altima (2012 model) and is registered in South Carolina. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #PKM482 was first searched on LookupAPlate on May 19, 2024, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
Nissan
Model
Altima
Model Year
2012
Trim
2.5 S
Plant Country
UNITED STATES
Engine
Displacement (CC)
2500
Displacement (L)
2.5
Valve Train Design
DOHC
Exterior Body
Body Class
SEDAN
Doors
4-DR
Mechanical / Drivetrain
Drive Type
FWD
Interior / Seat
Number of Seats
5
Transmission
Transmission Style
Manual
Transmission Speeds
6
Active Safety System
Anti-lock Braking System (ABS)
4-Wheel ABS
License Plate PKM482
The vehicle owner's information for the 2012 Nissan Altima with license plate PKM482 may be available through our data provider. Click the button below to start your free search.
There are no reports against the license plate
#PKM482. Feel free to add your feedback
under the "Add Report" tab.
Showing 4 recalls
AIR BAGS:SIDE/WINDOW (12V055000)
Received on 14/02/2012
Make
NISSAN
Model
ALTIMA
Notes
CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE ONE OR BOTH SIDE CURTAIN AIR BAG MODULES, AS NECESSARY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 12, 2012. OWNERS MAY CONTACT NISSAN CUSTOMER SERVICE AT 615-725-1000.
Summary
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 ALTIMA AND VERSA VEHICLES. THESE VEHICLES MAY BE EQUIPPED WITH SIDE CURTAIN AIR BAGS THAT CONTAIN AN INCORRECT PROPELLANT MIXTURE FOR THE INITIATOR COMPONENT USED, RESULTING IN INSUFFICIENT OUTPUT OF COMPRESSED GAS.
Component
AIR BAGS:SIDE/WINDOW
ModelYear
2012
Conequence
THE SIDE CURTAIN AIR BAGS MAY NOT DEPLOY, INCREASING THE RISK OF INJURY.
Manufacturer
NISSAN NORTH AMERICA, INC.
ReportReceivedDate
14/02/2012
NHTSACampaignNumber
12V055000
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE (11V408000)
Received on 09/08/2011
Make
NISSAN
Model
ALTIMA
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
NISSAN WILL REPLACE THE AIR BAG CONTROL UNIT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 22, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Summary
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 NISSAN ALTIMA VEHICLES MANUFACTURED FROM JUNE 15, 2011, THROUGH JUNE 21, 2011 AND MODEL YEAR 2012 NISSAN NV VEHICLES MANUFACTURED FROM JUNE 23, 2011, THROUGH JUNE 28, 2011 BECAUSE THE AIR BAG CONTROL UNIT (ACU) WAS ASSEMBLED INCORRECTLY.
Component
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE
ModelYear
2012
Conequence
THE AFFECTED ACU WILL NOT OPERATE AS DESIGNED AND THIS ISSUE MAY CAUSE THE AIR BAGS NOT TO INFLATE IN A CRASH WHEN THEY ARE DESIGNED TO INFLATE. THIS COULD INCREASE THE RISK OF INJURY.
Manufacturer
NISSAN NORTH AMERICA, INC.
ReportReceivedDate
09/08/2011
NHTSACampaignNumber
11V408000
STEERING (12V494000)
Received on 10/10/2012
Make
NISSAN
Model
ALTIMA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Nissan will notify owners, and dealers will tighten the bolts to the proper torque specifications. The safety recall is expected to begin during November 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
Summary
Nissan is recalling certain model year 2012-2013 Altima vehicles manufactured from May 10, 2012, through July 26, 2012. These vehicles may have been equipped with transverse link bolts and power steering rack bolts that were not torqued to proper specification.
Component
STEERING
ModelYear
2012
Conequence
The affected bolts could become loose and fall out which may lead to a loss of vehicle control, increasing the risk of a vehicle crash.
Manufacturer
Nissan North America, Inc.
ReportReceivedDate
10/10/2012
NHTSACampaignNumber
12V494000
SUSPENSION (11V371000)
Received on 19/07/2011
Make
NISSAN
Model
ALTIMA
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
NISSAN WILL REPLACE THE TRANSVERSE LINK BOLTS AND NUTS AND TIGHTEN THEM TO THE PROPER TORQUE SPECIFICATION FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 8, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Summary
NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN ALTIMA SEDAN VEHICLES MANUFACTURED FROM APRIL 25, 2011, THROUGH JUNE 10, 2011 AT THE CANTON, MISSISSIPPI PLANT. THE TRANSVERSE LINK BOLT MAY NOT HAVE BEEN TORQUED TO THE PROPER SPECIFICATION. THIS CONDITION COULD CAUSE THE BOLT TO BECOME LOOSE WHILE THE VEHICLE IS BEING DRIVEN, CREATING A RATTLING NOISE AND VIBRATION.
Component
SUSPENSION
ModelYear
2012
Conequence
IF THE BOLT COMES OUT COMPLETELY, THE DRIVER MAY EXPERIENCE DIFFICULTY CONTROLLING THE DIRECTION OF THE VEHICLE WHICH COULD RESULT IN A CRASH.
Manufacturer
NISSAN NORTH AMERICA, INC.
ReportReceivedDate
19/07/2011
NHTSACampaignNumber
11V371000