#HRSA License Plate
2008 MAZDA Mazda3
Oregon, US
Rate Driver
1
0
Overview
The license plate number #HRSA belongs to a MAZDA Mazda3 (2008 model) and is registered in Oregon as a passenger car manufactured by MAZDA MOTOR CORPORATION. The vehicle most likely has a personalized license plate that is affixed to the front and rear of the vehicle. The license plate #HRSA was first searched on LookupAPlate on June 28, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
MAZDA
Manufacturer Name
MAZDA MOTOR CORPORATION
Model
Mazda3
Model Year
2008
Plant City
HOFU
Vehicle Type
PASSENGER CAR
Plant Country
JAPAN
Plant State
YAMAGUCHI
Engine
Displacement (CC)
2300.0
Displacement (CI)
140.35461141788
Displacement (L)
2.3
Engine Model
L3T (2.3L) Turbo Federal
Fuel Type - Primary
Gasoline
Engine Brake (hp) From
263
Turbo
Yes
Exterior Body
Body Class
Hatchback/Liftback/Notchback
Doors
5
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
1st Row (Driver and Passenger)
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate HRSA
Vehicle ownership information for the 2008 MAZDA Mazda3 with license plate HRSA may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#HRSA. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR (11V329000)
Received on 15/06/2011
Make
MAZDA
Model
MAZDA3
Notes
MAZDA SAFETY RECALL NO. 6411F. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
DEALERS WILL INSTALL AN ADDITIONAL GROUND HARNESS ON THE WIPER MOTOR FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JULY 15, 2011. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.
Summary
MAZDA IS RECALLING CERTAIN MODEL YEAR 2008-2009 MAZDA3 AND MAZDASPEED3 VEHICLES MANUFACTURED FROM JANUARY 7, 2008, THROUGH NOVEMBER 28, 2008. THE GROUND TERMINAL OF THE WINDSHIELD WIPER MOTOR MAY HAVE BEEN INADVERTENTLY BENT DURING ASSEMBLY. IF THIS CONDITION EXISTS THEN OVER TIME THE ELECTRICAL RESISTANCE OF THE MOTOR CIRCUIT MAY INCREASE UP TO A POINT THAT THE WINDSHIELD WIPERS WOULD NOT WORK.
Component
VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
ModelYear
2008
Conequence
THE LOSS OF WIPER FUNCTION IN ADVERSE WEATHER COULD POTENTIALLY INCREASE THE RISK OF A CRASH.
Manufacturer
MAZDA MOTOR CORP
ReportReceivedDate
15/06/2011
NHTSACampaignNumber
11V329000
STEERING:ELECTRIC POWER ASSIST SYSTEM (10V374000)
Received on 12/08/2010
Make
MAZDA
Model
MAZDA3
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
MAZDA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE POWER STEERING PUMP AND LINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 15, 2010. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.
Summary
MAZDA IS RECALLING CERTAIN MODEL YEAR 2007-2009 MAZDA3 AND MAZDA5 VEHICLES MANUFACTURED FROM APRIL 2, 2007 THROUGH NOVEMBER 30, 2008. THESE VEHICLES MAY HAVE A CONDITION IN WHICH A SUDDEN LOSS OF POWER STEERING ASSIST COULD OCCUR AT ANY TIME WHILE DRIVING THE VEHICLE.
Component
STEERING:ELECTRIC POWER ASSIST SYSTEM
ModelYear
2008
Conequence
POWER STEERING ASSIST IS SUDDENLY LOST REDUCING THE DRIVER'S ABILITY TO STEER THE VEHICLE AS TYPICALLY EXPECTED, AND INCREASING THE RISK OF A CRASH.
Manufacturer
MAZDA MOTOR CORP
NHTSAActionNumber
PE10021
ReportReceivedDate
12/08/2010
NHTSACampaignNumber
10V374000
EQUIPMENT (09E011000)
Received on 02/04/2009
Make
MAZDA
Model
MAZDA3
Notes
THIS RECALL ONLY PERTAINS TO THULE AFTERMARKET ROOF MOUNTED LOAD CARRIERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
THULE WILL MAIL A RETRO FIT KIT ALONG WITH REPAIR INSTRUCTIONS TO OWNERS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE APRIL 13, 2009. OWNERS MAY CONTACT THULE TOLL-FREE AT 1-800-238-2388.
Summary
THULE, INC. IS RECALLING 2,323 OWNER-INSTALLED ROOF-MOUNTED FIT KITS, MODELS 3068 AND 3069, MANUFACTURED BETWEEN JANUARY 1, 2008 AND FEBRUARY 28, 2009 THAT ARE USED WITH THULE PODIUM FOOT PACKS, MODELS 460 AND 460R. THESE FIT KITS WERE SOLD AS AFTERMARKET EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE BOLT(S) USED TO SECURE THE FOOT TO THE VEHICLE WAS MANUFACTURED TO A HARDNESS THAT MAY CAUSE THE BOLT(S) TO BE BRITTLE AND POTENTIALLY BREAK UNDER STRESS.
Component
EQUIPMENT
ModelYear
2008
Conequence
THIS MAY RESULT IN THE BOLT(S) SNAPPING OFF DURING USE OR WITHOUT A LOAD. THE UNSECURED RACK AND LOAD CAN THEN COME LOOSE WHILE DRIVING CREATING A POTENTIAL ROAD HAZARD, POSSIBLY RESULTING IN A VEHICLE CRASH.
Manufacturer
THULE, INC.
ReportReceivedDate
02/04/2009
NHTSACampaignNumber
09E011000
If you were injured in an incident involving #HRSA or any other vehicle in Oregon, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Oregon Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process