#DIDIT License Plate
2008 BMW 128i
Oregon, US
Rate driver
0
1
Overview
The license plate number #DIDIT belongs to a BMW 128i (2008 model) and is registered in Oregon as a passenger car manufactured by BMW AG. The vehicle most likely has a personalized license plate that is affixed to the front and rear of the vehicle. The license plate #DIDIT was first searched on LookupAPlate on April 24, 2024, and it currently has one community report. You can find the detailed report of the vehicle below.
Specifications
General
Make
BMW
Manufacturer Name
BMW AG
Model
128i
Model Year
2008
Plant City
LEIPZIG
Series
1-Series
Trim
SULEV
Vehicle Type
PASSENGER CAR
Plant Country
GERMANY
Engine
Engine Number of Cylinders
6
Displacement (CC)
2995.5552992
Displacement (CI)
182.8
Displacement (L)
3
Fuel Type - Primary
Gasoline
Engine Brake (hp) From
230
Exterior Body
Body Class
Convertible/Cabriolet
Doors
2
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
Dual-stage suppl. restraint system (SRS) certified to the advanced airbag requiremnets of FMVSS 208, S14.
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate DIDIT
The vehicle owner's information for the 2008 BMW 128i with license plate DIDIT may be available through our data provider. Click the button below to start your free search.
One user has reported license plate #DIDIT. Read the report below or add your
own feedback under the
"Add Report" tab.
Road Rage Apr 24, 2024
Road Rage
Apr 24, 2024 White convertible. Older male tried to block me from merging, then laid on his horn when I merged, yelled and gestured all the way to the off ramp. He then tailed me to the off ramp, sped through traffic and weaved to get behind me through the lights. When I waited to turn left into a lot, he stopped in the middle of the road to yell and swear at me. Dude stayed angry forever, and then tried to follow me. Nut job.
Showing 5 recalls
ELECTRICAL SYSTEM:WIRING (19V579000)
Received on 06/08/2019
Make
BMW
Model
128I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began October 4, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of an earlier recall number 17V-676.
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2012 BMW 128i, 135i, 135is Coupes and 128i, 135i Convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.
Component
ELECTRICAL SYSTEM:WIRING
ModelYear
2008
Conequence
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
06/08/2019
NHTSACampaignNumber
19V579000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (20V017000)
Received on 15/01/2020
Make
BMW
Model
128I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i
xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2008
Conequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Manufacturer
BMW of North America, LLC
NHTSAActionNumber
EA15001
ReportReceivedDate
15/01/2020
NHTSACampaignNumber
20V017000
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV) (17V683000)
Received on 30/10/2017
Make
BMW
Model
128I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Component
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
ModelYear
2008
Conequence
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
30/10/2017
NHTSACampaignNumber
17V683000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (16V071000)
Received on 05/02/2016
Make
BMW
Model
128I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i xDrive, 335is and M3 Coupes and Convertibles, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i SAVs, 2007-2010 X3 xDrive30i SAVs, 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M SAVs, 2009-2013 BMW X5 xDrive35d SAVs, 2008-2014 X6 xDrive35i, X6 xDrive50i, and X6 M SACs, 2010-2011 BMW X6 xDrive50i SACs and 2008-2011 M3 Sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2008
Conequence
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Manufacturer
BMW of North America, LLC
NHTSAActionNumber
EA15001
ReportReceivedDate
05/02/2016
NHTSACampaignNumber
16V071000
ELECTRICAL SYSTEM (13V044000)
Received on 07/02/2013
Make
BMW
Model
128I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at [email protected].
Summary
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through June 2011; and 2009-2011 Z4 vehicles manufactured March 2009 through June 2011. In February 2013, BMW recalled 504,545 vehicles. In July 2013, BMW informed the agency that it was adding 1-Series, 3-Series, and Z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.
Component
ELECTRICAL SYSTEM
ModelYear
2008
Conequence
If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
07/02/2013
NHTSACampaignNumber
13V044000