#571GCS License Plate
2020 HYUNDAI Elantra
North Dakota, US
Rate Driver
0
0
Overview
The license plate number #571GCS belongs to a HYUNDAI Elantra (2020 model) and is registered in North Dakota as a passenger car manufactured by HYUNDAI-KIA AMERICA TECHNICAL CENTER INC (HATCI). The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #571GCS was first searched on LookupAPlate on June 16, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
HYUNDAI
Manufacturer Name
HYUNDAI-KIA AMERICA TECHNICAL CENTER INC (HATCI)
Model
Elantra
Model Year
2020
Trim
SEL, Value Edition & Limited
Vehicle Type
PASSENGER CAR
Plant Country
UNITED STATES (USA)
Plant State
ALABAMA
Engine
Engine Number of Cylinders
4
Displacement (CC)
2000
Displacement (CI)
122.0474881894
Displacement (L)
2
Engine Model
MPI NU
Fuel Type - Primary
Gasoline
Valve Train Design
Dual Overhead Cam (DOHC)
Fuel Delivery / Fuel Injection Type
Multipoint Fuel Injection (MPFI)
Engine Brake (hp) From
147
Engine Manufacturer
HMC
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
1st and 2nd Rows
Front Air Bag Locations
1st Row (Driver and Passenger)
Knee Air Bag Locations
Driver Seat Only
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate 571GCS
Vehicle ownership information for the 2020 HYUNDAI Elantra with license plate 571GCS may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#571GCS. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
ENGINE (21V301000)
Received on 28/04/2021
Make
HYUNDAI
Model
ELANTRA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Dealers will inspect and, if necessary, replace the engine, free of charge. In addition, Hyundai will deploy Piston Ring Noise Sensing System (PNSS) software. Owner notification letters were mailed August 24, 2021. Owners may contact Hyundai customer service at 1-855-371-9460.
Summary
Hyundai Motor America (Hyundai) is recalling certain 2019-2020 Elantra, 2019-2021 Kona and Veloster vehicles equipped with 2.0L Nu MPI engines. The piston oil rings may not have been properly heat-treated, which could result in engine damage.
Component
ENGINE
ModelYear
2020
Conequence
A damaged engine may stall, increasing the risk of a crash. In addition, oil may leak onto hot exhaust components, increasing the risk of a fire.
Manufacturer
Hyundai Motor America
ReportReceivedDate
28/04/2021
NHTSACampaignNumber
21V301000
WHEELS:LUGS/NUTS/BOLTS (19V720000)
Received on 09/10/2019
Make
HYUNDAI
Model
ELANTRA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Hyundai will notify owners, and dealers will inspect and, if necessary, tighten the lug nuts, free of charge. The recall began November 15, 2019. Owners may contact Hyundai customer service at 1-800-251-0871. Hyundai's number for this recall is 184.
Summary
Hyundai Motor America (Hyundai) is recalling certain 2019 Ioniq Hybrid and 2020 Elantra vehicles. The right-side rear wheel lug nuts may have been insufficiently tightened, allowing the wheel to detach from the vehicle.
Component
WHEELS:LUGS/NUTS/BOLTS
ModelYear
2020
Conequence
A wheel detaching from the vehicle increases the risk of a crash.
Manufacturer
Hyundai Motor America
ReportReceivedDate
09/10/2019
NHTSACampaignNumber
19V720000
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT (19V721000)
Received on 09/10/2019
Make
HYUNDAI
Model
ELANTRA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Hyundai will notify owners, and dealers will inspect and, as necessary, tighten the ball joint fasteners, free of charge. The recall began November 20, 2019. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 185.
Summary
Hyundai Motor America (Hyundai) is recalling certain 2020 Elantra vehicles. The lower control arm ball joint fasteners may have been insufficiently tightened allowing the ball joint to detach from the lower control arm.
Component
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
ModelYear
2020
Conequence
A detached ball joint can cause a loss of vehicle control, increasing the risk of a crash.
Manufacturer
Hyundai Motor America
ReportReceivedDate
09/10/2019
NHTSACampaignNumber
19V721000
If you were injured in an incident involving #571GCS or any other vehicle in North Dakota, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated North Dakota Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process