#Z28FFV License Plate
2004 NISSAN Xterra
New Jersey, US
Rate Driver
0
0
Overview
The license plate number #Z28FFV belongs to a NISSAN Xterra (2004 model) and is registered in New Jersey as a multipurpose passenger vehicle (mpv) manufactured by NISSAN NORTH AMERICA, INC.. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #Z28FFV was first searched on LookupAPlate on June 20, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
NISSAN
Manufacturer Name
NISSAN NORTH AMERICA, INC.
Model
Xterra
Model Year
2004
Plant City
SMYRNA
Vehicle Type
MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country
UNITED STATES (USA)
Plant Company Name
Smyrna Plant
Plant State
TENNESSEE
Series2
Wagon body style
Engine
Engine Number of Cylinders
6
Displacement (CC)
3300.0
Displacement (CI)
201.37835551261
Displacement (L)
3.3
Engine Model
VG33E
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Exterior Body
Body Class
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Doors
4
Mechanical / Drivetrain
Drive Type
4WD/4-Wheel Drive/4x4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Mechanical Brake
Brake System Type
Hydraulic
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate Z28FFV
Vehicle ownership information for the 2004 NISSAN Xterra with license plate Z28FFV may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#Z28FFV. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
STEERING:COLUMN (10V554000)
Received on 11/11/2010
Make
NISSAN
Model
XTERRA
Notes
NISSAN SAFETY RECAL NO. R1037. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
THE STEERING COLUMN SHAFT AND JOINT WILL BE REPLACED WITH A SHAFT OF A DIFFERENT DESIGN. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 13, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Summary
NISSAN IS RECALLING CERTAIN MODEL YEAR 2002-2004 FRONTIER VEHICLES MANUFACTURED FROM JULY 9, 2001 THROUGH OCTOBER 20, 2004, AND MODEL YEAR 2002-2004, XTERRA VEHICLES MANUFACTURED FROM JULY 9, 2001, THROUGH JANUARY 6, 2005. OVER TIME CORROSION MAY FORM IN THE LOWER STEERING COLUMN JOINT AND LIMIT MOVEMENT OF THE JOINT. THE LIMITED MOVEMENT OF THIS JOINT MAY CREATE EXCESSIVE LOAD ON THE LOWER STEERING COLUMN SHAFT. IF THE VEHICLE CONTINUES TO BE DRIVEN IN THIS CONDITION, IT MAY LEAD TO CRACKING OF THE SHAFT DURING LOW SPEED MANEUVERS THAT REQUIRE LARGE STEERING INPUTS.
Component
STEERING:COLUMN
ModelYear
2004
Conequence
THE SHAFT MAY BREAK WHICH COULD RESULT IN LOSS OF STEERING CONTROL DURING THESE LOW SPEED MANEUVERS INCREASING THE RISK OF A CRASH.
Manufacturer
NISSAN NORTH AMERICA, INC.
ReportReceivedDate
11/11/2010
NHTSACampaignNumber
10V554000
EQUIPMENT (07E046000)
Received on 03/07/2007
Make
NISSAN
Model
XTERRA
Notes
THIS RECALL ONLY PERTAINS TO AFTERMARKET HARNESSES AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY NISSAN. CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
HOPKINS WILL NOTIFY OWNERS AND REPLACE THE ORIGINAL HARNESS WITH A REVISED HARNESS FREE OF CHARGE. THE RECALL BEGAN AUGUST 17, 2007. OWNERS CAN CONTACT HOPKINS AT 800-835-0129.
Summary
CERTAIN HOPKINS AFTERMARKET TRAILER BRAKE CONTROL CONNECTION HARNESSES SOLD FOR USE ON CERTAIN MODELS OF NISSAN VEHICLES WHICH ARE LISTED ABOVE. THE INTERNAL PART NUMBERS WITHIN HOPKINS ARE: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, AND 1290376035. A WIRE MAY HAVE BEEN PLACED IN AN INCORRECT POSITION IN THE ELECTRICAL CONNECTOR HOUSING. THIS RESULTS IN AN INCORRECT ROUTING OF WIRES BETWEEN THE TRAILER BRAKE CONTROLLER AND THE TOWING VEHICLE WIRING SYSTEM.
Component
EQUIPMENT
ModelYear
2004
Conequence
THIS HARNESS WOULD RESULT IN POWER FROM THE TRAILER BRAKE CONTROLLER GOING TO THE TOWING VEHICLE DASH LIGHT CIRCUIT RATHER THAN THE TRAILER BRAKES. THIS RESULT WOULD BE THE LACK OF TRAILER BRAKING WHEN THE TOWING VEHICLE BRAKES WERE APPLIED. IT WOULD ALSO RESULT IN THE TOWING VEHICLES DASH LIGHTS BEING ACTIVATED WHEN THE VEHICLE BRAKES WERE APPLIED. THE FAILURE OF THE APPLICATION OF THE TRAILER BRAKE COULD RESULT IN REDUCED ABILITY TO STOP AND CONTRIBUTE TO A POSSIBLE CRASH.
Manufacturer
HOPKINS MANUFACTURING CORP.
ReportReceivedDate
03/07/2007
NHTSACampaignNumber
07E046000
TRAILER HITCHES (04V581000)
Received on 15/12/2004
Make
NISSAN
Model
XTERRA
Notes
NISSAN RECALL NO. PB124. CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
DEALERS WILL TIGHTEN THE TOW HITCH. THE RECALL BEGAN ON JANUARY 3, 2005. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261.
Summary
ON CERTAIN SPORT UTILITY VEHICLES, THE ACCESSORY TOW HITCH ATTACHMENT BOLTS MAY NOT HAVE BEEN TIGHTENED TO THE PROPER SPECIFICATION.
Component
TRAILER HITCHES
ModelYear
2004
Conequence
THIS COULD CAUSE THE TOW HITCH TO LOOSEN OR SEPARATE FROM THE VEHICLE WHICH COULD RESULT IN A CRASH WITHOUT WARNING.
Manufacturer
NISSAN NORTH AMERICA, INC.
ReportReceivedDate
15/12/2004
NHTSACampaignNumber
04V581000
If you were injured in an incident involving #Z28FFV or any other vehicle in New Jersey, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated New Jersey Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process