#LCPDK9 License Plate
2008 FORD Crown Victoria
New Hampshire, US
Rate Driver
0
0
Overview
The license plate number #LCPDK9 belongs to a FORD Crown Victoria (2008 model) and is registered in New Hampshire as a passenger car manufactured by FORD MOTOR COMPANY OF CANADA, LTD.. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #LCPDK9 was first searched on LookupAPlate on August 29, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
FORD
Manufacturer Name
FORD MOTOR COMPANY OF CANADA, LTD.
Model
Crown Victoria
Model Year
2008
Plant City
TALBOTVILLE
Vehicle Type
PASSENGER CAR
Plant Country
CANADA
Plant Company Name
St. Thomas
Plant State
ONTARIO
Series2
Police Interceptor
Engine
Engine Number of Cylinders
8
Displacement (CC)
4600.0
Displacement (CI)
280.70922283576
Displacement (L)
4.6
Fuel Type - Primary
Flexible Fuel Vehicle (FFV)
Valve Train Design
Single Overhead Cam (SOHC)
Engine Configuration
V-Shaped
Engine Brake (hp) From
224
Engine Brake (hp) To
239
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
1st Row (Driver and Passenger)
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate LCPDK9
Vehicle ownership information for the 2008 FORD Crown Victoria with license plate LCPDK9 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#LCPDK9. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
STEERING:RACK AND PINION:PINION SHAFT (14V704000)
Received on 05/11/2014
Make
FORD
Model
CROWN VICTORIA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.
Summary
Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.
Component
STEERING:RACK AND PINION:PINION SHAFT
ModelYear
2008
Conequence
Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.
Manufacturer
Ford Motor Company
ReportReceivedDate
05/11/2014
NHTSACampaignNumber
14V704000
STEERING (13V385000)
Received on 29/08/2013
Make
FORD
Model
CROWN VICTORIA
Notes
A separate service campaign applies to vehicles in non-corrosion states not addressed by this safety recall. Owners of these vehicles should contact Ford directly about these vehicles. For the safety recall, owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.
Summary
Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.
Component
STEERING
ModelYear
2008
Conequence
If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.
Manufacturer
Ford Motor Company
NHTSAActionNumber
EA13004
ReportReceivedDate
29/08/2013
NHTSACampaignNumber
13V385000
SUSPENSION:FRONT:HUB (07V270000)
Received on 26/06/2007
Make
FORD
Model
CROWN VICTORIA
Notes
FORD RECALL NO. 07S54. CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
DEALERS WILL INSPECT BOTH FRONT WHEEL BEARING AND HUB ASSEMBLIES AND REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON JUNE 22, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Summary
ON CERTAIN PASSENGER VEHICLES, A FRONT WHEEL BEARING AND HUB ASSEMBLY MAY FRACTURE DUE TO IMPROPER HEAT TREATMENT.
Component
SUSPENSION:FRONT:HUB
ModelYear
2008
Conequence
IF A HUB FRACTURES, IT MAY POTENTIALLY DETACH FROM THE WHEEL KNUCKLE, RESULTING IN THE WHEEL BEING RETAINED ONLY BY THE BRAKE CALIPER ASSEMBLY. AS A RESULT, THE WHEEL MAY SEPARATE FROM THE VEHICLE POTENTIALLY RESULTING IN A CRASH.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
26/06/2007
NHTSACampaignNumber
07V270000
If you were injured in an incident involving #LCPDK9 or any other vehicle in New Hampshire, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated New Hampshire Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process