#EHY537 License Plate
2008 FORD F-350
Montana, US
Rate Driver
0
0
Overview
The license plate number #EHY537 belongs to a FORD F-350 (2008 model) and is registered in Montana as a truck manufactured by FORD MOTOR COMPANY. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #EHY537 was first searched on LookupAPlate on June 27, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
FORD
Manufacturer Name
FORD MOTOR COMPANY
Model
F-350
Model Year
2008
Plant City
JEFFERSON COUNTY
Series
Super Duty - Single Rear Wheel
Vehicle Type
TRUCK
Plant Country
UNITED STATES (USA)
Plant Company Name
Kentucky Truck
Plant State
KENTUCKY
Engine
Engine Number of Cylinders
10
Displacement (CC)
6800.0
Displacement (CI)
414.96145984417
Displacement (L)
6.8
Engine Model
6.8L EFI
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Engine Brake (hp) From
305
Engine Manufacturer
Ford
Exterior / Truck
Cab Type
Crew/Super Crew/Crew Max
Exterior Body
Body Class
Pickup
Mechanical / Drivetrain
Drive Type
4WD/4-Wheel Drive/4x4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 3: 10,001 - 14,000 lb (4,536 - 6,350 kg)
Mechanical Brake
Brake System Type
Hydraulic
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate EHY537
Vehicle ownership information for the 2008 FORD F-350 with license plate EHY537 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#EHY537. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 7 recalls
TIRES:TREAD/BELT (11T002000)
Received on 15/03/2011
Make
FORD
Model
F-350
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
CONTINENTAL TIRE WILL NOTIFY OWNERS AND REPLACE THE AFFECTED TIRES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 14, 2011. OWNERS MAY CONTACT CONTINENTAL CUSTOMER SERVICE TOLL-FREE AT 1-888-799-2168.
Summary
CONTINENTAL TIRE IS RECALLING CERTAIN CONTITRAC TR TIRES, SIZE LT275/70R18 125/122S OUTLINE WHITE LETTERS AND BLACK SIDEWALL, AND CONTITRAC, SIZE LT275/70R18 125/122S, BLACK SIDEWALL, PRODUCED FROM MAY 6, 2007, THROUGH SEPTEMBER 20, 2008, SOLD AS AFTERMARKET AND INSTALLED AS ORIGINAL EQUIPMENT ON SOME MODEL YEAR 2008 AND 2009 FORD F-250 AND F-350 TRUCKS. SOME OF THESE TIRES MAY EXPERIENCE UNEVEN WEAR, VIBRATION, OR PARTICULARLY UNDER CONDITIONS OF OVERLOADING OR UNDER INFLATION IN HIGH AMBIENT TEMPERATURE USAGE, SEPARATION BETWEEN THE BELT EDGES.
Component
TIRES:TREAD/BELT
ModelYear
2008
Conequence
SEPARATION OF THE BELT EDGES COULD LEAD TO TREAD BELT SEPARATION, INCREASING THE RISK OF A CRASH.
Manufacturer
CONTINENTAL TIRE THE AMERICAS, LLC.
ReportReceivedDate
15/03/2011
NHTSACampaignNumber
11T002000
TRAILER HITCHES (08V344000)
Received on 28/07/2008
Make
FORD
Model
F-350
Notes
CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236
(TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
KNAPHEIDE WILL OFFER TWO REMEDIES TO ITS CUSTOMERS: (1) FOR THOSE CUSTOMERS WHO DO NOT USE THE HITCH, THE HITCH WILL BE REMOVED FROM THE TRUCK BED AND REPLACED WITH AN ICC BUMPER; OR (2) FOR THOSE CUSTOMERS WHO NEED A HITCH, A RECEIVER HITCH ASSEMBLY WILL BE ADDED TO THE EXISTING HITCH ASSEMBLY AND ALL SUSPECT WELD JOINTS WILL BE RE WELDED. THE RECALL BEGAN ON AUGUST 15, 2008. OWNERS MAY CONTACT KNAPHEIDE AT 1-877-473-5763.
Summary
KNAPHEIDE IS RECALLING 108 MY 2006-2008 PRO SERIES TRUCK BEDS EQUIPPED WITH AN ICC BUMPER WHICH INCLUDED A PROVISION FOR A BALL HITCH. THERE MAY BE AN INSUFFICIENT WELD ATTACHING THE HITCH CHANNEL TO THE SUPPORTING STRUCTURE.
Component
TRAILER HITCHES
ModelYear
2008
Conequence
THIS COULD RESULT IN BENDING OF THE HITCH CHANNEL OR THE HITCH COULD BE PULLED OFF THE VEHICLE, INCREASING THE RISK OF A CRASH.
Manufacturer
KNAPHEIDE MANUFACTURING COMPANY
ReportReceivedDate
28/07/2008
NHTSACampaignNumber
08V344000
FUEL SYSTEM, GASOLINE:DELIVERY (08V191000)
Received on 25/04/2008
Make
FORD
Model
F-350
Notes
FORD RECALL NO. 08C04. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
DEALERS WILL INSTALL A BRACKET ON THE AFFECTED VEHICLES FREE OF CHARGE. THE RECALL BEGAN ON MAY 23, 2008. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Summary
FORD IS RECALLING 64,754 MY 2008 F-250 AND F-350 SINGLE REAR WHEEL, 4X4, 156 INCH WHEEL BASE PICK UP TRUCKS EQUIPPED WITH A TWO PIECE DRIVE SHAFT FOR FAILING TO CONFORM TO THE FUEL SPILLAGE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY." DURING A 30 MPH FRONTAL IMPACT INTO A RIGID BARRIER, THE FUEL TANK CAN MOVE FORWARD AND CONTACT A FRAME CROSS MEMBER, POTENTIALLY CAUSING DAMAGE TO THE FUEL DELIVERY MODULE WHICH CAN RESULT IN FUEL SPILLAGE.
Component
FUEL SYSTEM, GASOLINE:DELIVERY
ModelYear
2008
Conequence
FUEL SPILLAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
25/04/2008
NHTSACampaignNumber
08V191000
SEATS (08V096000)
Received on 28/02/2008
Make
FORD
Model
F-350
Notes
FORD RECALL NO. 08C01. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
DEALERS WILL ADD A REINFORCEMENT TO THE DRIVER'S SEAT BACK FRAME ON THE 40% SPLIT OR CAPTAIN'S CHAIR SEAT EQUIPPED WITH LUMBAR SUPPORT OR, IF NECESSARY, THE SEAT BACK FRAME WILL BE REPLACED. THE RECALL BEGAN ON MARCH 28, 2008. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Summary
FORD IS RECALLING 87,515 MY 2008 F250, F-350, F-450, AND F-550 VEHICLES FOR FAILING TO COMPLY WITH ALL THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." SOME 40% SPLIT AND CAPTAIN'S CHAIR DRIVER'S SEATS, EQUIPPED WITH LUMBAR SUPPORTS, MAY HAVE IMPROPER WELDS AT THE JOINT OF THE SEAT BACK PIVOT BRACKET AND THE SEAT BACK FRAME.
Component
SEATS
ModelYear
2008
Conequence
IN THE EVENT OF A CRASH, THE SEAT SIDE PIVOT BRACKET MAY CRACK OR BREAK, INCREASING THE RISK OF INJURY TO THE SEAT OCCUPANT.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
28/02/2008
NHTSACampaignNumber
08V096000
ELECTRICAL SYSTEM:12V/24V/48V BATTERY (07V140000)
Received on 26/03/2007
Make
FORD
Model
F-350
Notes
FORD RECALL NO. 07S50. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
DEALERS WILL INSPECT THE BATTERY B+ WIRE LOCATION AND, IF NECESSARY, REPOSITION THE WIRE. THE RECALL BEGAN ON APRIL 3, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Summary
ON CERTAIN TRUCKS EQUIPPED WITH A 6.4L DIESEL ENGINE, INSUFFICIENT CLEARANCE OF THE BATTERY POSITIVE (B+) WIRE TO THE RIGHT HAND SPLASH SHIELD BOLT MAY RESULT IN THE BATTERY B+ WIRE CONTACTING THE SPLASH SHIELD BOLT.
Component
ELECTRICAL SYSTEM:12V/24V/48V BATTERY
ModelYear
2008
Conequence
LONG TERM CONTACT COULD CAUSE WIRE CHAFE, RESULTING IN COPPER WIRE BEING EXPOSED. IF THIS CONDITION OCCURS, THE BATTERY B+ WIRE COULD SHORT TO GROUND INCREASING THE RISK OF A FIRE.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
26/03/2007
NHTSACampaignNumber
07V140000
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) (07V139000)
Received on 26/03/2007
Make
FORD
Model
F-350
Notes
FORD RECALL NO. 07S49. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
DEALERS WILL REPROGRAM THE POWER TRAIN CONTROL MODULE. THE RECALL BEGAN ON APRIL 3, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Summary
ON CERTAIN TRUCKS EQUIPPED WITH A 6.4L DIESEL ENGINE, EXCESSIVE TEMPERATURES IN THE DIESEL PARTICULATE FILTER IN THE EXHAUST SYSTEM MAY RESULT FROM EXCESS HYDROCARBONS IN THE EXHAUST.
Component
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM)
ModelYear
2008
Conequence
LACK OF POWER OR ROUGH OPERATION, UNUSUAL NOISES FROM THE ENGINE OR EXHAUST, WHITE SMOKE FROM THE EXHAUST, AND POTENTIALLY A VISIBLE FLAME OUT THE TAILPIPE CAN OCCUR.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
26/03/2007
NHTSACampaignNumber
07V139000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (07V541000)
Received on 21/11/2007
Make
FORD
Model
F-350
Notes
FORD RECALL NO. 07C19. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
DEALERS WILL REPLACE YOUR DRIVER AIR BAG MODULE FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 20, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Summary
CERTAIN VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS SPECIFIED IN FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, 'OCCUPANT CRASH PROTECTION.' THE DRIVER AIR BAG MODULE MAY NOT HAVE BEEN PROPERLY ASSEMBLED.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2008
Conequence
THIS CONDITION MAY PREVENT THE DRIVER AIR BAG FROM PROPERLY DEPLOYING AND REDUCE OCCUPANT PROTECTION IN THE EVENT OF A CRASH.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
21/11/2007
NHTSACampaignNumber
07V541000
If you were injured in an incident involving #EHY537 or any other vehicle in Montana, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Montana Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process