#PMG472 License Plate
2011 FORD E-250
Iowa, US
Rate Driver
0
0
Overview
The license plate number #PMG472 belongs to a FORD E-250 (2011 model) and is registered in Iowa as a truck manufactured by FORD MOTOR COMPANY. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #PMG472 was first searched on LookupAPlate on June 19, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
FORD
Manufacturer Name
FORD MOTOR COMPANY
Model
E-250
Model Year
2011
Plant City
AVON LAKE
Series
Econoline
Vehicle Type
TRUCK
Plant Country
UNITED STATES (USA)
Plant Company Name
Ohio Assembly Plant
Plant State
OHIO
Engine
Engine Number of Cylinders
8
Displacement (CC)
4600.0
Displacement (CI)
280.70922283576
Displacement (L)
4.6
Engine Model
Ford
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Engine Brake (hp) From
225
Other Engine Info
Displacement is 4.6L 2V
Exterior Body
Body Class
Cargo Van
Mechanical / Drivetrain
Drive Type
4x2
Exterior Dimension
Gross Vehicle Weight Rating From
Class 2G: 8,001 - 9,000 lb (3,629 - 4,082 kg)
Mechanical Brake
Brake System Type
Hydraulic
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
License Plate PMG472
Vehicle ownership information for the 2011 FORD E-250 with license plate PMG472 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#PMG472. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 16 recalls
EQUIPMENT ADAPTIVE/MOBILITY (16V350000)
Received on 24/05/2016
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
New England will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on June 29, 2016. Owners may contact New England customer service at 1-800-886-9247. New England's number for this recall is 16E-020.
Summary
New England Wheels (New England) is recalling certain model year 2006-2014 Ford E-250, E-350, and 2015 Ford Transit vans equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The platform side plate of the affected wheelchair lifts may crack. Additionally, the lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the platform side plates crack or the platform mounting fails from out-of-position bearings, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the vehicle's doors are opened, the platform may fall onto the lift operator, increasing their risk of injury.
Manufacturer
New England Wheels
ReportReceivedDate
24/05/2016
NHTSACampaignNumber
16V350000
EQUIPMENT ADAPTIVE/MOBILITY (15V779000)
Received on 20/11/2015
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
New England Wheels will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on January 5, 2016. Owners may contact New England Wheels customer service at 1-800-866-9247, or Ricon Customer Service at 1-800-322-2884. New England Wheels' number for this recall is 15E-068. Note: These vans and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.
Summary
New England Wheels is recalling certain model year 2006-2014 Ford E-250, and E-350 cargo vans modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts built by the Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Manufacturer
New England Wheels
NHTSAActionNumber
RQ15002
ReportReceivedDate
20/11/2015
NHTSACampaignNumber
15V779000
FUEL SYSTEM, OTHER:STORAGE (14V097000)
Received on 04/03/2014
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Landi Renzo USA will notify owners, and dealers will inspect and replace the side arm brackets, as necessary, free of charge. The recall began on March 27, 2014. Owners may contact Landi Renzo USA at 1-855-526-3400.
Summary
Landi Renzo USA is recalling certain model year 2011-2014 Ford E-150, E-250, and E-350 vehicles modified January 2, 2011, through February 24, 2014 to operate on compressed natural gas (CNG). In the affected vehicles, the left and right rear brackets that support the rear CNG cylinder may fail, allowing the cylinder to dislodge from the vehicle.
Component
FUEL SYSTEM, OTHER:STORAGE
ModelYear
2011
Conequence
If the cylinder dislodges, a CNG leak may result, increasing the risk of a fire.
Manufacturer
Landi Renzo USA
ReportReceivedDate
04/03/2014
NHTSACampaignNumber
14V097000
EQUIPMENT ADAPTIVE/MOBILITY (14V584000)
Received on 23/09/2014
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
National Van will notify owners to take buses to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on October 3, 2014. Owners may contact National Van customer service at 1-800-527-7477. National Van's number for this recall is Ricon2014.
Summary
National Van Builders, Inc. (National Van) is recalling certain 2007-2014 Ford E-150 and E-250 vehicles manufactured February 26, 2007, to August 19, 2014, and equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Manufacturer
National Van Builiders, Inc.
ReportReceivedDate
23/09/2014
NHTSACampaignNumber
14V584000
EQUIPMENT ADAPTIVE/MOBILITY (15V729000)
Received on 04/11/2015
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
MobilityWorks will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on December 15, 2015. Owners may contact MobilityWorks customer service at 1-800-769-8267, or Ricon Customer Service at 1-800-322-2884. Note: These vehicles and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.
Summary
MobilityWorks (WMK Inc.) is recalling certain model year 2006-2014 Ford E-150, E-250, and E-350 vans modified by MobilityWorks to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Manufacturer
Mobility Works (WMK Inc.)
ReportReceivedDate
04/11/2015
NHTSACampaignNumber
15V729000
EQUIPMENT ADAPTIVE/MOBILITY (14V617000)
Received on 03/10/2014
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
New England will notify owners to take vehicles to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on November 17, 2014. Owners may contact New England customer service at 1-800-886-9247 or Ricon customer service at 1-800-322-2884. New England's number for this recall is 14E-041.
Summary
New England Wheels (New England) is recalling certain model year 2006-2014 E-250, and E-350 vehicles modified by New England to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Manufacturer
New England Wheels
ReportReceivedDate
03/10/2014
NHTSACampaignNumber
14V617000
EQUIPMENT ADAPTIVE/MOBILITY (15V763000)
Received on 17/11/2015
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Mobility Specialists will notify owners to take their vehicles to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on November 13, 2015. Owners may contact Mobility Specialists customer service at 1-877-777-5438, or Ricon customer service at 1-800-322-2884.
Summary
Mobility Specialists, Inc. (Mobility Specialists) is recalling certain model year 2006-2014 Ford E-250, and E-350 vehicles modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack. Additionally, the affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator. Additionally, if the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Manufacturer
Mobility Specialists, Inc.
ReportReceivedDate
17/11/2015
NHTSACampaignNumber
15V763000
VISIBILITY:WINDSHIELD (11V445000)
Received on 26/08/2011
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Ford will notify owners, and dealers will inspect and replace the windshield if bubbles are present, free of charge. The recall began in January 2014. Owners may contact the Ford customer relationship center at 1-866-436-7332. Ford's recall campaign number is 11C20.
Summary
Ford Motor Company (Ford) is recalling certain model year 2011 Ford E-150, E-250, E-350, and E-450 vehicles built from May 12, 2011, through May 26, 2011. Due to improper manufacturing conditions, some of the windshields may form bubbles after an extended time in hot temperatures. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."
Component
VISIBILITY:WINDSHIELD
ModelYear
2011
Conequence
The presence of bubbles may hinder driver's visibility thereby increasing the risk of a crash.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
26/08/2011
NHTSACampaignNumber
11V445000
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS (14V426000)
Received on 10/07/2014
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Roush will notify owners and will replace the aluminum fuel line fittings with new stainless steel fittings, free of charge. The recall began on September 1, 2014. Owners may contact Roush customer service at 1-800-597-6874.
Summary
Roush Performance Products, Inc. (Roush) is recalling certain model year 2010-2012 Ford E-150 Wagons and Cargo Vans, E-250 Cargo Vans and Extended Cargo Vans, E-350 Wagons, Extended Wagons, Cargo Vans, and Extended Vans, and E-450 Cutaway models. These models were modified by Roush to be equipped with certain propane fuel system conversion kits manufactured January 2011 to August 2012 with an aluminum fuel line fitting. Due to a reaction between the different metals, the affected kits may develop a propane leak where the aluminum fuel line fitting contacts the brass supply valve housing.
Component
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
ModelYear
2011
Conequence
A propane leak in the presence of an ignition source increases the risk of a fire.
Manufacturer
Roush Performance Products, Inc.
ReportReceivedDate
10/07/2014
NHTSACampaignNumber
14V426000
FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM (11V450000)
Received on 31/08/2011
Make
FORD
Model
E-250
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
ROUSH WILL NOTIFY OWNERS OF THE VEHICLES OF WHICH THE KITS WERE INSTALLED IN ORDER TO ARRANGE FOR FREE REPLACEMENT OF THE INJECTOR RETENTION CLIPS. THE SAFETY RECALL BEGAN ON SEPTEMBER 26, 2011. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.
Summary
ROUSH IS RECALLING CERTAIN MODEL YEAR 2009-2011 FORD E-150, E-250, AND E-350 5.4L ENGIN VANS/WAGONS/CUTAWAYS, AND MODEL YEAR 2010-2011 FORD E-450 6.8L ENGINE CUTAWAY VEHICLES ALTERED BY ROUCH TO OPERATE USING THE ROUSH BRANDED CLEANTECH PROPANE AUTOGAS FUEL SYSTEM. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS.
Component
FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM
ModelYear
2011
Conequence
A PROPANE LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Manufacturer
ROUSH PERFORMANCE PRODUCTS, INC.
ReportReceivedDate
31/08/2011
NHTSACampaignNumber
11V450000
FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM (11E033000)
Received on 31/08/2011
Make
FORD
Model
E-250
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
ROUSH WILL NOTIFY OWNERS OF THE VEHICLES OF WHICH THE KITS WERE INSTALLED ON IN ORDER TO ARRANGE FOR FREE REPLACEMENT OF THE INJECTOR RETENTION CLIPS. THE SAFETY RECALL BEGAN ON SEPTEMBER 29, 2011. OWNERS MAY CONTACT ROUSH AT 1-800-59-ROUCH (1-800-597-6874.
Summary
ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS USED FOR INSTALLATION ON THE FOLLOWING VEHICLES: MODEL YEAR 2007 AND 2008 FORD E-350 (DUEL REAR WHEEL), MY 2009-2011 FORD E- 150, E-250, AND E-350, AND MY 2009-2011 FORD E-450 CUTAWAYS. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P07C2-176KIT-AB, P10C2-RCOMMKIT-AB, P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.
Component
FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM
ModelYear
2011
Conequence
A GAS LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Manufacturer
ROUSH INDUSTRIES, INC.
ReportReceivedDate
31/08/2011
NHTSACampaignNumber
11E033000
EQUIPMENT ADAPTIVE/MOBILITY (14V706000)
Received on 05/11/2014
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Cummings will notify owners to take buses to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began January 13, 2015. Owners may contact Cumming's customer service at 1-800-639-5438 or Ricon customer service at 1-800-322-2884. Cumming's number for this recall is 14E-041.
Summary
Cummings Mobility Conversion & Supply (Cummings) is recalling certain model year 2006-2014 Ford E-150, E-250, E-350, Chevrolet Express, 2006-2008 Dodge Sprinter, and 2009-2014 Mercedes-Benz Sprinter, and 2013 Ford Transit Connect vehicles manufactured January 1, 2006, to October 8, 2014, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.
Component
EQUIPMENT ADAPTIVE/MOBILITY
ModelYear
2011
Conequence
If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Manufacturer
Cummings Mobility Conversion & Supply
NHTSAActionNumber
EQ14013
ReportReceivedDate
05/11/2014
NHTSACampaignNumber
14V706000
SEATS:FRONT ASSEMBLY:POWER ADJUST (11V246000)
Received on 20/04/2011
Make
FORD
Model
E-250
Notes
FORD'S RECALL CAMPAIGN NUMBER IS 11C16. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
DEALERS WILL INSPECT THE DRIVER'S SEAT TRACK ASSEMBLY, AND IF NECESSARY, REPLACE IT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 4, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
Summary
FORD IS RECALLING CERTAIN MODEL YEAR 2011 E-150, E-250, E-350 AND E-450 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." IT MAY BE POSSIBLE THAT UNDER UNUSUALLY HIGH LOADS, SUCH AS DURING A CRASH, THE DRIVER POWER SEAT TRACK WORM GEAR MAY FRACTURE.
Component
SEATS:FRONT ASSEMBLY:POWER ADJUST
ModelYear
2011
Conequence
IN THE EVENT OF A CRASH OR OTHER CIRCUMSTANCES OF SEVERE LOADING, THE WORM GEAR COULD FRACTURE AND ALLOW THE SEAT TO SHIFT UNRESTRAINED FORWARD OR BACKWARD INCREASING THE RISK AND/OR SEVERITY OF INJURIES TO THE DRIVER.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
20/04/2011
NHTSACampaignNumber
11V246000
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS (11V307000)
Received on 31/05/2011
Make
FORD
Model
E-250
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
ROUSH WILL REPLACE THE DEFECTIVE VALVE WITH A CORRECTLY MACHINED ONE. ALL THE AFFECTED VEHICLES HAVE BEEN REPAIRED, THEREFORE, AN OWNER NOTIFICATION LETTER WILL NOT BE ISSUED FOR THIS CAMPAIGN. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.
Summary
ROUSH PERFORMANCE PRODUCTS IS RECALLING CERTAIN 2011 FORD E-SERIES VANS EQUIPPED WITH 5.4 OR 6.8 LITER ENGINES THAT HAVE BEEN ALTERED BY ROUSH TO OPERATE USING THE ROUSH LIQUID PROPANE AUTOGAS FUEL SYSTEM. A VALVE IN THE SYSTEM MAY HAVE BEEN MISMACHINED ALLOWING A PROPANE LEAK.
Component
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
ModelYear
2011
Conequence
A PROPANE LEAK IN THE PRESENCE OF AN IGNITION SOURCE MAY RESULT IN A VEHICLE FIRE.
Manufacturer
ROUSH PERFORMANCE PRODUCTS, INC.
ReportReceivedDate
31/05/2011
NHTSACampaignNumber
11V307000
EQUIPMENT (13V261000)
Received on 21/06/2013
Make
FORD
Model
E-250
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Mobility Works will notify owners and Ricon will provide a supplemental cover kit and instructions, free of charge. This recall campaign is expected to begin July 15, 2013. Owners may contact Mobility Works at 1-877-275-4912 and Ricon at 1-818-267-3000.
Summary
Mobility Works is recalling certain model year 2006-2012 Ford E-150, E-250 and E-350 vehicles manufactured August 2006 through August 2012. The vehicles are equipped with certain Ricon S series and K Series wheelchair lifts with an optional armored pendant cable. The armored cable may be positioned such that it does not clear the wheelchair lift.
Component
EQUIPMENT
ModelYear
2011
Conequence
If the cable does not clear the wheel chair lift it may contact the power lug and, if it does not have a nonconductive cover, or it has an improperly installed non-conductive cover, a short circuit may occur that could result in a fire.
Manufacturer
Mobility Works (WMK Inc.)
NHTSAActionNumber
EQ13003
ReportReceivedDate
21/06/2013
NHTSACampaignNumber
13V261000
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS (11E019000)
Received on 31/05/2011
Make
FORD
Model
E-250
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
AS OF MAY 27, 2011, ROUSH HAD NOTIFIED ALL OWNERS OF RECORD BY TELEPHONE AND SHIPPED TO THEM REPLACEMENT VALVES FREE OF CHARGE. OWNERS MAY CONTACT ROUSH AT 1-734-466-6255.
Summary
ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS PRODUCED BETWEEN DECEMBER 17, 2010, AND MAY 6, 2011, USED FOR INSTALLATION ON FLEET VEHICLES MODEL YEAR 2009 THROUGH 2011 FORD E-SERIES VANS/WAGONS/SHUTTLES/CUTAWAY (150, 250 AND 350) WITH 5.4L ENGINES ("E-SERIES"), AND MY 2011 FORD E-450 CUTAWAYS. THE VALVES INSTALLED IN THE SERVICE PORT OF THE FUEL RAILS OF THE KIT WERE UNDER MINIMUM SPECIFICATION FOR THE DIAMETER. THIS LED TO INSUFFICIENT COMPRESSION OF THE O-RING, ALLOWING LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P-10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.
Component
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
ModelYear
2011
Conequence
A GAS LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Manufacturer
ROUSH INDUSTRIES, INC.
ReportReceivedDate
31/05/2011
NHTSACampaignNumber
11E019000
If you were injured in an incident involving #PMG472 or any other vehicle in Iowa, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Iowa Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process