#O4AMUSE License Plate
2016 MAZDA CX-3
Iowa, US
Rate Driver
0
0
Overview
The license plate number #O4AMUSE belongs to a MAZDA CX-3 (2016 model) and is registered in Iowa as a passenger car manufactured by MAZDA MOTOR CORPORATION. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #O4AMUSE was first searched on LookupAPlate on July 07, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
MAZDA
Manufacturer Name
MAZDA MOTOR CORPORATION
Model
CX-3
Model Year
2016
Plant City
HIROSHIMA
Series
Touring/GS
Vehicle Type
PASSENGER CAR
Plant Country
JAPAN
Plant Company Name
Mazda Motor Corporation
Engine
Engine Number of Cylinders
4
Displacement (CC)
2000
Displacement (CI)
122.0474881894
Displacement (L)
2
Engine Stroke Cycles
4
Engine Model
PE
Fuel Type - Primary
Gasoline
Engine Configuration
In-Line
Engine Manufacturer
Mazda
Exterior Body
Body Class
Wagon
Doors
5
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
All Rows
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Indirect
License Plate O4AMUSE
Vehicle ownership information for the 2016 MAZDA CX-3 with license plate O4AMUSE may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#O4AMUSE. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 2 recalls
STRUCTURE:BODY:HATCHBACK/LIFTGATE (16V644000)
Received on 06/09/2016
Make
MAZDA
Model
CX-3
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Summary
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
Component
STRUCTURE:BODY:HATCHBACK/LIFTGATE
ModelYear
2016
Conequence
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Manufacturer
Mazda North American Operations
ReportReceivedDate
06/09/2016
NHTSACampaignNumber
16V644000
STEERING (16V203000)
Received on 11/04/2016
Make
MAZDA
Model
CX-3
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
Summary
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
Component
STEERING
ModelYear
2016
Conequence
If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Manufacturer
Mazda North American Operations
ReportReceivedDate
11/04/2016
NHTSACampaignNumber
16V203000
If you were injured in an incident involving #O4AMUSE or any other vehicle in Iowa, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Iowa Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process