#LHR184 License Plate
2011 NISSAN Rogue
Iowa, US
Rate Driver
0
0
Overview
The license plate number #LHR184 belongs to a NISSAN Rogue (2011 model) and is registered in Iowa as a multipurpose passenger vehicle (mpv) manufactured by NISSAN MOTOR COMPANY, LTD. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #LHR184 was first searched on LookupAPlate on October 29, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
NISSAN
Manufacturer Name
NISSAN MOTOR COMPANY, LTD
Model
Rogue
Model Year
2011
Plant City
MIYAWAKA
Vehicle Type
MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country
JAPAN
Plant Company Name
Kyushu Plant
Plant State
FUKUOKA
Series2
Wagon body style
Engine
Displacement (CC)
2500.0
Displacement (CI)
152.55936023683
Displacement (L)
2.5
Fuel Type - Primary
Gasoline
Exterior Body
Body Class
Crossover Utility Vehicle (CUV)
Doors
4
Mechanical / Drivetrain
Drive Type
4WD/4-Wheel Drive/4x4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1C: 4,001 - 5,000 lb (1,814 - 2,268 kg)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
1st and 2nd Rows
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
2nd row outboard 3-point manual belt and curtain side airbags
Active Safety System
Anti-lock Braking System (ABS)
Standard
Tire Pressure Monitoring System (TPMS) Type
Direct
Exterior / Wheel tire
Number of Wheels
4
License Plate LHR184
Vehicle ownership information for the 2011 NISSAN Rogue with license plate LHR184 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#LHR184. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 2 recalls
ELECTRICAL SYSTEM (15V032000)
Received on 26/01/2015
Make
NISSAN
Model
ROGUE
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Nissan will notify owners, and dealers will inspect the kick panel wiring harness connector and will if necessary install a new harness connector and waterproof seal, free of charge. The recall began on February 26, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Summary
Nissan North America, Inc. (Nissan) is recalling certain model year 2008-2013 Nissan Rogue vehicles manufactured March 7, 2007, to November 26, 2013, and 2014 Nissan Rogue Select vehicles manufactured September 23, 2013, to July 2, 2014. The affected vehicles may experience an electrical short in the harness connector due to a mixture of snow/water and salt seeping through the carpet on the driver side floor near the harness connector.
Component
ELECTRICAL SYSTEM
ModelYear
2011
Conequence
An electrical short can cause a vehicle fire.
Manufacturer
Nissan North America, Inc.
ReportReceivedDate
26/01/2015
NHTSACampaignNumber
15V032000
STEERING:ELECTRIC POWER ASSIST SYSTEM (11V565000)
Received on 23/11/2011
Make
NISSAN
Model
ROGUE
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE EPS CONTROL UNIT IF NECESSARY, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING DECEMBER 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Summary
NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 ROGUE VEHICLES MANUFACTURED FROM AUGUST 17, 2010, THROUGH OCTOBER 30, 2010. THE CIRCUIT BOARD MAY NOT HAVE BEEN INSTALLED IN THE CORRECT POSITION ON CERTAIN ELECTRIC POWER STEERING (EPS) ASSIST CONTROL UNITS. THIS MAY CAUSE ADDITIONAL STRESS ON THE SOLDER OF THE TERMINAL TO THE CIRCUIT BOARD RESULTING IN THE SOLDER CRACKING AND SEPARATING COMPLETELY FROM THE CIRCUIT BOARD.
Component
STEERING:ELECTRIC POWER ASSIST SYSTEM
ModelYear
2011
Conequence
AS THE CIRCUIT BOARD FAILS, THE POWER STEERING ASSIST FEATURE WILL STOP FUNCTIONING, INCREASING THE FORCE NEEDED TO STEER THE VEHICLE AND INCREASING THE RISK OF A CRASH.
Manufacturer
NISSAN NORTH AMERICA, INC.
ReportReceivedDate
23/11/2011
NHTSACampaignNumber
11V565000
If you were injured in an incident involving #LHR184 or any other vehicle in Iowa, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Iowa Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process