#1ALHA3U License Plate
2010 MAZDA Mazda3
Idaho, US
Rate Driver
0
0
Overview
The license plate number #1ALHA3U belongs to a MAZDA Mazda3 (2010 model) and is registered in Idaho as a passenger car manufactured by MAZDA MOTOR CORPORATION. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #1ALHA3U was first searched on LookupAPlate on June 06, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
MAZDA
Manufacturer Name
MAZDA MOTOR CORPORATION
Model
Mazda3
Model Year
2010
Plant City
HOFU, YAMAGUCHI
Series
Sedan
Vehicle Type
PASSENGER CAR
Plant Country
JAPAN
Engine
Displacement (CC)
2500.0
Displacement (CI)
152.55936023683
Displacement (L)
2.5
Engine Model
L5X California
Fuel Type - Primary
Gasoline
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
1st and 2nd Rows
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate 1ALHA3U
Vehicle ownership information for the 2010 MAZDA Mazda3 with license plate 1ALHA3U may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#1ALHA3U. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
SEATS (17V082000)
Received on 09/02/2017
Make
MAZDA
Model
MAZDA3
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
Summary
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
Component
SEATS
ModelYear
2010
Conequence
If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
Manufacturer
Mazda North American Operations
ReportReceivedDate
09/02/2017
NHTSACampaignNumber
17V082000
STRUCTURE:BODY:HATCHBACK/LIFTGATE (16V644000)
Received on 06/09/2016
Make
MAZDA
Model
MAZDA3
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Summary
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
Component
STRUCTURE:BODY:HATCHBACK/LIFTGATE
ModelYear
2010
Conequence
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Manufacturer
Mazda North American Operations
ReportReceivedDate
06/09/2016
NHTSACampaignNumber
16V644000
ELECTRICAL SYSTEM (09V126000)
Received on 16/04/2009
Make
MAZDA
Model
MAZDA3
Notes
MAZDA RECALL NO. 5409D. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
DEALERS WILL HAVE THE ENGINE HARNESS INSPECT AND ADD A PROTECTOR CLIP ON THE AFFECTED SECTION OF THE HARNESS. IF NECESSARY, THE HARNESS WILL BE REPAIRED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON MAY 6, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
Summary
MAZDA IS RECALLING 25,400 MY 2010 MAZDA3 VEHICLES. A CLEARANCE BETWEEN THE ENGINE HARNESS AND THE HOUSING OF STARTER MOTOR MAY BE INSUFFICIENT. DUE TO THIS, THE COVERING OF THE HARNESS MAY BE DAMAGED THROUGH VIBRATION DURING OPERATION POSSIBLY CAUSING A SHORT-CIRCUIT BETWEEN CERTAIN HARNESS WIRES AND THE STARTER HOUSING. A SHORT-CIRCUIT CAN RESULT IN ENGINE CONTROL MALFUNCTION AND/OR POOR SHIFT QUALITY.
Component
ELECTRICAL SYSTEM
ModelYear
2010
Conequence
THE MAIN FUSE MAY BLOW OUT CAUSING THE ENGINE TO STALL AND INABILITY OF RESTART, INCREASING THE RISK OF A CRASH.
Manufacturer
MAZDA MOTOR CORP
ReportReceivedDate
16/04/2009
NHTSACampaignNumber
09V126000
If you were injured in an incident involving #1ALHA3U or any other vehicle in Idaho, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Idaho Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process