#1A892KF License Plate
2012 BMW 135i
Idaho, US
Rate Driver
0
0
Overview
The license plate number #1A892KF belongs to a BMW 135i (2012 model) and is registered in Idaho as a passenger car manufactured by BMW AG. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #1A892KF was first searched on LookupAPlate on May 28, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
BMW
Manufacturer Name
BMW AG
Model
135i
Model Year
2012
Plant City
LEIPZIG
Series
1-Series
Vehicle Type
PASSENGER CAR
Plant Country
GERMANY
Engine
Engine Number of Cylinders
6
Displacement (CC)
2979.1682352
Displacement (CI)
181.8
Displacement (L)
3.0
Fuel Type - Primary
Gasoline
Engine Brake (hp) From
300
Exterior Body
Body Class
Coupe
Doors
2
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Pretensioner
Yes
Seat Belt Type
Manual
Other Restraint System Info
Head Inflatable Restraint for Driver, Front Passenger, Rear Outboard Driver-side and Rear Outboard Passenger-side. Pretensioners for Driver and Front Passenger.
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate 1A892KF
Vehicle ownership information for the 2012 BMW 135i with license plate 1A892KF may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#1A892KF. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 6 recalls
ELECTRICAL SYSTEM:WIRING (19V579000)
Received on 06/08/2019
Make
BMW
Model
135I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began October 4, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of an earlier recall number 17V-676.
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2012 BMW 128i, 135i, 135is Coupes and 128i, 135i Convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.
Component
ELECTRICAL SYSTEM:WIRING
ModelYear
2012
Conequence
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
06/08/2019
NHTSACampaignNumber
19V579000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (20V017000)
Received on 15/01/2020
Make
BMW
Model
135I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i
xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2012
Conequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Manufacturer
BMW of North America, LLC
NHTSAActionNumber
EA15001
ReportReceivedDate
15/01/2020
NHTSACampaignNumber
20V017000
POWER TRAIN:DRIVELINE:CONSTANT VELOCITY JOINT (17V067000)
Received on 02/02/2017
Make
BMW
Model
135I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will inspect the rear driveshaft CV joint and, based on its production date, will replace it, free of charge. The recall began April 21, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2011-2012 135i Coupe, 1 Series M Coupe and 135i Convertible vehicles, 2011 Z4 sDrive 35i, 335i, 335d, 335i Coupe, 335is Coupe, 335i Convertible, 335is Convertible, 535i, 535i xDrive, 535i Gran Turismo and 550i xDrive Gran Turismo vehicles and 2012 740i and 740Li vehicles. The rear driveshaft constant velocity (CV) joint on the affected vehicles may fatigue and break.
Component
POWER TRAIN:DRIVELINE:CONSTANT VELOCITY JOINT
ModelYear
2012
Conequence
If the CV joint breaks, the vehicle may have a loss of propulsion, increasing the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
02/02/2017
NHTSACampaignNumber
17V067000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (16V071000)
Received on 05/02/2016
Make
BMW
Model
135I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i xDrive, 335is and M3 Coupes and Convertibles, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i SAVs, 2007-2010 X3 xDrive30i SAVs, 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M SAVs, 2009-2013 BMW X5 xDrive35d SAVs, 2008-2014 X6 xDrive35i, X6 xDrive50i, and X6 M SACs, 2010-2011 BMW X6 xDrive50i SACs and 2008-2011 M3 Sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2012
Conequence
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Manufacturer
BMW of North America, LLC
NHTSAActionNumber
EA15001
ReportReceivedDate
05/02/2016
NHTSACampaignNumber
16V071000
ENGINE AND ENGINE COOLING:ENGINE (14V176000)
Received on 10/04/2014
Make
BMW
Model
135I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i Sedan, 535i xDrive Sedan, X3 xDrive 28i, and X3 xDrive 35i, 2010 X3 xDrive 30i, and X5 xDrive 30i, 2012 640i Coupe, and 640i Convertible and 2010-2012 535i Gran Turismo vehicles. In the affected vehicles, the bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and may possibly break.
Component
ENGINE AND ENGINE COOLING:ENGINE
ModelYear
2012
Conequence
If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
10/04/2014
NHTSACampaignNumber
14V176000
ELECTRICAL SYSTEM (13V044000)
Received on 07/02/2013
Make
BMW
Model
135I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at [email protected].
Summary
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through June 2011; and 2009-2011 Z4 vehicles manufactured March 2009 through June 2011. In February 2013, BMW recalled 504,545 vehicles. In July 2013, BMW informed the agency that it was adding 1-Series, 3-Series, and Z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.
Component
ELECTRICAL SYSTEM
ModelYear
2012
Conequence
If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
07/02/2013
NHTSACampaignNumber
13V044000
If you were injured in an incident involving #1A892KF or any other vehicle in Idaho, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Idaho Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process