#BGP26U License Plate
2011 FORD Edge
Arkansas, US
Rate Driver
0
0
Overview
The license plate number #BGP26U belongs to a FORD Edge (2011 model) and is registered in Arkansas as a multipurpose passenger vehicle (mpv) manufactured by FORD MOTOR COMPANY OF CANADA, LTD.. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #BGP26U was first searched on LookupAPlate on November 10, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
FORD
Manufacturer Name
FORD MOTOR COMPANY OF CANADA, LTD.
Model
Edge
Model Year
2011
Plant City
OAKVILLE
Trim
Limited
Vehicle Type
MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country
CANADA
Plant Company Name
Oakville
Plant State
ONTARIO
Engine
Engine Number of Cylinders
6
Displacement (CC)
3500.0
Displacement (CI)
213.58310433156
Displacement (L)
3.5
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Engine Brake (hp) From
285
Other Engine Info
Ti-VCT
Engine Manufacturer
Ford
Exterior Body
Body Class
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Doors
4
Mechanical / Drivetrain
Drive Type
FWD/Front-Wheel Drive
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Mechanical Brake
Brake System Type
Hydraulic
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st and 2nd Rows
Passive Safety System
Seat Belt Type
Manual
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate BGP26U
Vehicle ownership information for the 2011 FORD Edge with license plate BGP26U may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#BGP26U. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
ELECTRICAL SYSTEM:SOFTWARE (11V128000)
Received on 24/02/2011
Make
FORD
Model
EDGE
Notes
FORD SAFETY RECALL NO. 10S14. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
DEALER WILL INSPECT THE BODY CONTROL MODULE AND IF NECESSARY REPLACE IT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 7, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
Summary
FORD IS RECALLING CERTAIN MODEL YEAR 2011 FORD F-150, F-250, F-350, F-450, F-550, EDGE, AND LINCOLN MKX TRUCKS MANUFACTURED FROM OCTOBER 25, 2010, THROUGH NOVEMBER 20, 2010. THESE VEHICLES WERE INSPECTED USING INTEGRATED DIAGNOSTIC SYSTEM (IDS) THAT HAD A CUSTOM SOFTWARE ROUTINE TO READ THE SUSPECT BODY CONTROL MODULE (BCM) SERIAL NUMBER. BASED ON THE SERIAL NUMBER THE BCM WAS EITHER NOT AFFECTED OR REPLACED. THE CUSTOM SOFTWARE ROUTINE WAS NOT READING THE CORRECT SET OF CHARACTERS, AND WAS NOT ABLE TO IDENTIFY A BCM THAT REQUIRED REPLACEMENT AFFECTED BCMS MAY HAVE THE POTENTIAL FOR AN INTERNAL SHORT.
Component
ELECTRICAL SYSTEM:SOFTWARE
ModelYear
2011
Conequence
IF AN ELECTRICAL SHORT DEVELOPS, AN OVERHEATING CONDITION MAY OCCUR WHICH COULD RESULT IN A VEHICLE FIRE.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
24/02/2011
NHTSACampaignNumber
11V128000
LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK (10V516000)
Received on 27/10/2010
Make
FORD
Model
EDGE
Notes
FORD SAFETY RECALL NO. 10C14. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
FORD WILL NOTIFY OWNERS AND DEALERS WILL HAVE THE AFFECTED CONTROL MODULES UPDATED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 1, 2010. OWNERS MAY CONTACT FORD AT 1-866-436-7332.
Summary
FORD IS RECALLING CERTAIN MODEL YEAR 2011 EDGE AND LINCOLN MKX VEHICLES MANUFACTURED FROM JULY 1, 2010, THROUGH OCTOBER 8, 2010. THESE VEHICLES WERE SHIPPED WITH INCORRECTLY CONFIGURED ELECTRONIC MODULE SETTINGS THAT DISABLE THE LOCKING FUNCTION OF THE LIFTGATE. ACCORDINGLY, THE VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, "DOOR LOCKS AND DOOR RETENTION COMPONENTS."
Component
LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK
ModelYear
2011
Conequence
THE LIFTGATE LOCK MAY BE DISABLED AND THE DRIVER MAY NOT BE ABLE TO LOCK THE LIFTGATE USING INTERIOR LOCK SWITCHES OR REMOTE KEY FOB BUTTONS.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
27/10/2010
NHTSACampaignNumber
10V516000
STRUCTURE:BODY (10V659000)
Received on 29/12/2010
Make
FORD
Model
EDGE
Notes
FORD'S RECALL CAMPAIGN NUMBER IS 10S14. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
DEALER WILL REPLACE THE BODY CONTROL MODULE IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 11, 2011. OWNERS MAY CONTACT FORD AT 1-866-436-7332.
Summary
FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-150, F-250, F-350, F-450, F-550, EDGE AND LINCOLN MKX VEHICLES. DURING A SIX-DAY PRODUCTION PERIOD, THE SUPPLIER OF THE BODY CONTROL MODULE MANUFACTURED MODULES THAT MAY HAVE THE POTENTIAL FOR AN INTERNAL SHORT.
Component
STRUCTURE:BODY
ModelYear
2011
Conequence
IF AN ELECTRICAL SHORT DEVELOPS, AN OVERHEATING CONDITION MAY OCCUR WHICH CAN RESULT IN AN UNATTENDED VEHICLE FIRE.
Manufacturer
FORD MOTOR COMPANY
ReportReceivedDate
29/12/2010
NHTSACampaignNumber
10V659000
If you were injured in an incident involving #BGP26U or any other vehicle in Arkansas, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Arkansas Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process