#25C0U8D License Plate
2014 DODGE Dart
Alabama, US
Rate Driver
0
0
Overview
The license plate number #25C0U8D belongs to a DODGE Dart (2014 model) and is registered in Alabama as a passenger car manufactured by FCA US LLC. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #25C0U8D was first searched on LookupAPlate on July 22, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
DODGE
Manufacturer Name
FCA US LLC
Model
Dart
Model Year
2014
Plant City
BELVIDERE
Trim
SXT
Vehicle Type
PASSENGER CAR
Plant Country
UNITED STATES (USA)
Plant Company Name
Belvidere Assembly
Plant State
ILLINOIS
Engine
Engine Number of Cylinders
4
Displacement (CC)
2400.0
Displacement (CI)
146.45698582735
Displacement (L)
2.4
Fuel Type - Primary
Gasoline
Other Engine Info
Sales Code: ED3,ED6,ED7,EDG
Turbo
No
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Mechanical / Drivetrain
Drive Type
FWD/Front-Wheel Drive
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Interior
Steering Location
Left-Hand Drive (LHD)
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
All Rows
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
Active Seat Belt: All Seating Positions; Air Bags: Outboard Seating Positions
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate 25C0U8D
Vehicle ownership information for the 2014 DODGE Dart with license plate 25C0U8D may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#25C0U8D. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
POWER TRAIN:AUTOMATIC TRANSMISSION (19V293000)
Received on 11/04/2019
Make
DODGE
Model
DART
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will replace the transmission side shifter cable bushing, free of charge. The recall began September 5, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V34.
Summary
Chrysler (FCA US LLC) is recalling certain 2013-2016 Dodge Dart vehicles equipped with 6-speed automatic transmissions. The shifter cable bushing may fail allowing the shift cable to detach from the transmission.
Component
POWER TRAIN:AUTOMATIC TRANSMISSION
ModelYear
2014
Conequence
If the shifter cable detaches from the transmission, the vehicle may not perform the shifts performed by the driver. Additionally, despite selecting PARK with the shifter, the vehicle may roll away. These scenarios may increase the risk of a crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
11/04/2019
NHTSACampaignNumber
19V293000
SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM (15V800000)
Received on 25/11/2015
Make
DODGE
Model
DART
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will inspect the brake booster grommet for the presence of oil. If no oil is found,
the vacuum tube assembly will be replaced. If oil is found, the vacuum pump, vacuum tube assembly, brake booster and master cylinder will be replaced. The recall began on May 9, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R63.
Summary
Chrysler Group LLC (Chrysler) is recalling certain model year 2013-2014 Dodge Dart vehicles manufactured February 27, 2012 to January 23, 2014 and equipped with either a 2.0L or 2.4L engine. In affected vehicles, engine oil from the vacuum pump may seep into the brake booster, damaging a component within the brake booster.
Component
SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM
ModelYear
2014
Conequence
Internal damage to brake booster could result in a loss of brake assist, lengthening the distance needed to stop the vehicle and increasing the risk of a crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
25/11/2015
NHTSACampaignNumber
15V800000
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) (15V542000)
Received on 25/08/2015
Make
DODGE
Model
DART
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will replace the TCM and bracket, free of charge. Chrysler issued an interim notification to owners on October 14, 2015. The recall began on January 15, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R42.
Summary
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Dodge Dart vehicles manufactured February 24, 2012, to June 16, 2015. The affected vehicles may experience failure of the transmission control module (TCM), causing the transmission to unexpectedly shift into neutral.
Component
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM)
ModelYear
2014
Conequence
If the transmission shifts into neutral, it can cause loss of motive power, increasing the risk of a vehicle crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
25/08/2015
NHTSACampaignNumber
15V542000
If you were injured in an incident involving #25C0U8D or any other vehicle in Alabama, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Alabama Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process