#NANASZ License Plate
2003 BMW Z4
Vermont, US
Rate Driver
1
0
Overview
The license plate number #NANASZ belongs to a BMW Z4 (2003 model) and is registered in Vermont as a passenger car manufactured by BMW MANUFACTURER CORPORATION / BMW NORTH AMERICA. The vehicle most likely has a personalized license plate that is affixed to the front and rear of the vehicle. The license plate #NANASZ was first searched on LookupAPlate on April 28, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
BMW
Manufacturer Name
BMW MANUFACTURER CORPORATION / BMW NORTH AMERICA
Model
Z4
Model Year
2003
Plant City
SPARTANBURG
Trim
Roadster 3.0si
Vehicle Type
PASSENGER CAR
Plant Country
UNITED STATES (USA)
Plant State
SOUTH CAROLINA
Note
Model Code: 0328,Shipping Weight Std.=2998 Auto.=3020/3042 ,GVWR Std. = 3549 ,Auto. = 3593 GAWRRear = 1863 ,Service Load = 551 ,Length w/ bumpers = 161.1 ,Width = 70.1 ,Height = 50.1 ,Track Front = 58 ,Track Rear = 60
Engine
Engine Number of Cylinders
6
Displacement (CC)
3000.0
Displacement (CI)
183.07123228419
Displacement (L)
3.0
Fuel Type - Primary
Gasoline
Engine Configuration
In-Line
Engine Brake (hp) From
225
Exterior Body
Body Class
Convertible/Cabriolet
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1B: 3,001 - 4,000 lb (1,360 - 1,814 kg)
Wheel Base (inches) From
98.2
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
License Plate NANASZ
Vehicle ownership information for the 2003 BMW Z4 with license plate NANASZ may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#NANASZ. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 4 recalls
SEAT BELTS:FRONT:BUCKLE ASSEMBLY (03V032000)
Received on 04/02/2003
Make
BMW
Model
Z4
Notes
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
DEALERS WILL INSPECT BOTH FRONT SAFETY BELT TENSIONER AND BUCKLE ASSEMBLIES, AND IF NECESSARY, REPLACE THESE PARTS. OWNER NOTIFICATION BEGAN MARCH 19, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Summary
ON CERTAIN PASSENGER VEHICLES, THE CONNECTION OF THE SAFETY BELT BUCKLE TO THE STEEL ROPE OF THE TENSIONER DOES NOT MEET BMW SPECIFICATIONS. IN SEVERE FRONTAL CRASHES, THIS CONNECTION CAN DETACH.
Component
SEAT BELTS:FRONT:BUCKLE ASSEMBLY
ModelYear
2003
Conequence
IF THE CONNECTION DETACHES, THE PROTECTION PROVIDED BY THE SAFETY BELT IS LIKELY TO BE IMPAIRED, AND SERIOUS INJURIES TO THE DRIVER AND/OR FRONT PASSENGER COULD OCCUR THAT MIGHT OTHERWISE BE MITIGATED.
Manufacturer
BAYERISCHE MOTOREN WERKE
ReportReceivedDate
04/02/2003
NHTSACampaignNumber
03V032000
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP (04V182000)
Received on 12/04/2004
Make
BMW
Model
Z4
Notes
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
DEALERS WILL INSTALL A RESISTOR IN THE ELECTRICAL LINE POWERING THE FUEL PUMP IN ORDER TO PREVENT AN OCCURRENCE OF VAPOR LOCK. THE RECALL BEGAN MAY 11, 2004. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
Summary
ON CERTAIN PASSENGER VEHICLES, UNDER CERTAIN ENVIRONMENTAL CONDITIONS, A VAPOR LOCK IN THE FUEL PUMP COULD OCCUR CAUSING THE ENGINE TO STALL. IF THIS WERE TO HAPPEN, THE ENGINE WOULD NOT BE ABLE TO BE RESTARTED FOR APPROXIMATELY 15 TO 20 MINUTES.
Component
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
ModelYear
2003
Conequence
IF STALLING WERE TO OCCUR, THE DRIVER WOULD BE UNABLE TO MAINTAIN VEHICLE SPEED OR ACCELERATE, INCREASING THE RISK OF A CRASH.
Manufacturer
BAYERISCHE MOTOREN WERKE
ReportReceivedDate
12/04/2004
NHTSACampaignNumber
04V182000
TIRES (03V214000)
Received on 09/06/2003
Make
BMW
Model
Z4
Notes
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
DEALERS WILL UNSEAT THE TIRE FROM ITS RIM, INSPECT FOR ANY DAMAGE, AND THEN RESEAT THE TIRE TO ITS RIM. IF INSPECTION REVEALS THAT A FRONT TIRE HAS INCURRED DAMAGE DURING THE MOUNTING PROCESS, IT WILL BE REPLACED. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
Summary
ON CERTAIN VEHICLES EQUIPPED WITH 18" TIRES, IT IS POSSIBLE THAT THE TIRE HAS BEEN DAMAGED DURING THE MOUNTING PROCESS TO THE RIM.
Component
TIRES
ModelYear
2003
Conequence
CONSEQUENTLY, A LOSS OF TIRE PRESSURE, OR A TIRE FAILURE, COULD OCCUR. DEPENDING ON TRAFFIC CONDITIONS AND THE DRIVER'S REACTIONS, THIS COULD LEAD TO A CRASH.
Manufacturer
BAYERISCHE MOTOREN WERKE
ReportReceivedDate
09/06/2003
NHTSACampaignNumber
03V214000
AIR BAGS (04V247000)
Received on 24/05/2004
Make
BMW
Model
Z4
Notes
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE AIR BAG SYSTEM PROCESSORS. THE RECALL BEGAN JUNE 11, 2004. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
Summary
ON CERTAIN PASSENGER VEHICLES, INCOMPATIBLE ELECTRONIC AIR BAG SYSTEM PROCESSORS MAY HAVE BEEN INSTALLED.
Component
AIR BAGS
ModelYear
2003
Conequence
IN THE EVENT OF A CRASH, AIR BAG DEPLOYMENT MAY NOT OCCUR, INCREASING THE RISK OF INJURIES TO THE DRIVER AND/OR FRONT PASSENGER.
Manufacturer
BAYERISCHE MOTOREN WERKE
ReportReceivedDate
24/05/2004
NHTSACampaignNumber
04V247000
If you were injured in an incident involving #NANASZ or any other vehicle in Vermont, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Vermont Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process