#KEN918 License Plate
2011 DODGE Avenger
Vermont, US
Rate Driver
0
0
Overview
The license plate number #KEN918 belongs to a DODGE Avenger (2011 model) and is registered in Vermont as a passenger car manufactured by FCA US LLC. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #KEN918 was first searched on LookupAPlate on April 06, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Destination Market
U.S., Canada, Mexico
Make
DODGE
Manufacturer Name
FCA US LLC
Model
Avenger
Model Year
2011
Plant City
STERLING HEIGHTS
Series
JS
Trim
Mainstreet/Express/SXT
Vehicle Type
PASSENGER CAR
Plant Country
UNITED STATES (USA)
Plant Company Name
STERLING HEIGHTS ASSEMBLY PLANT
Plant State
MICHIGAN
Trim2
E (Economy)
Engine
Engine Number of Cylinders
4
Displacement (CC)
2400.0
Displacement (CI)
146.45698582735
Displacement (L)
2.4
Fuel Type - Primary
Gasoline
Other Engine Info
Sales Code for Engine - EDG,ED3,ED7
Turbo
No
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Mechanical / Drivetrain
Drive Type
FWD/Front-Wheel Drive
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Interior
Steering Location
Left-Hand Drive (LHD)
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
All Rows
Passive Safety System
Pretensioner
Yes
Seat Belt Type
Manual
Other Restraint System Info
Active Seatbelts for all seating positions.
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate KEN918
Vehicle ownership information for the 2011 DODGE Avenger with license plate KEN918 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#KEN918. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
SEAT BELTS:PRETENSIONER (16V668000)
Received on 15/09/2016
Make
DODGE
Model
AVENGER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will replace the OCR, free of charge. Interim letters informing owners that parts are not available yet were mailed on October 26, 2016. The recall began on August 15, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S61.
Summary
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Chrysler 200, 2010 Chrysler Sebring, 2010-2012 Dodge Caliber and 2010-2014 Jeep Patriot, Compass and Dodge Avenger vehicles. The Occupant Restraint Control (OCR) module may short circuit, preventing the frontal air bags, seat belt pretensioners, and side air bags from deploying in the event of a crash.
Component
SEAT BELTS:PRETENSIONER
ModelYear
2011
Conequence
If the frontal air bags, seat belt pretensioners, and side air bags are disabled, there is an increased risk of injury to the vehicle occupants in the event of a vehicle crash that necessitates deployment of these safety systems.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
15/09/2016
NHTSACampaignNumber
16V668000
STEERING:COLUMN (11V315000)
Received on 08/06/2011
Make
DODGE
Model
AVENGER
Notes
CHRYSLER'S SAFETY RECALL NO. L23. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Remedy
DEALERS WILL INSPECT FOR RIVET PRESENCE AND ALIGNMENT AND REPAIR THE STEERING COLUMN PIVOT AS REQUIRED, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Summary
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET.
Component
STEERING:COLUMN
ModelYear
2011
Conequence
A MISSING OR INCORRECTLY INSTALLED RIVET COULD COMPROMISE THE ABILITY OF THE STEERING COLUMN TO SUPPORT THE OCCUPANT LOADS IN THE EVENT OF A FRONTAL CRASH, DECREASING THE EFFECTIVENESS OF THE FRONTAL IMPACT SAFETY SYSTEM. AS A RESULT, THE CONDITION MAY INCREASE THE POTENTIAL FOR INJURY IN A FRONTAL CRASH.
Manufacturer
CHRYSLER GROUP LLC
ReportReceivedDate
08/06/2011
NHTSACampaignNumber
11V315000
ELECTRICAL SYSTEM (13V282000)
Received on 02/07/2013
Make
DODGE
Model
AVENGER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will flash the Totally Integrated Power Module (TIPM) or replace the occupant restraint control module, as needed, free of charge. The recall began on November 19, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N38.
Summary
Chrysler is recalling certain model year 2011-2013 Sebring and 200 vehicles manufactured June 28, 2011, through December 13, 2012; model year 2011-2013 Dodge Avenger vehicles manufactured June 25, 2011, through January 14, 2013; model year 2011-2012 Dodge Nitro vehicles manufactured June 17, 2011, through December 15, 2011; and model year 2011-2012 Jeep Liberty vehicles manufactured June 17, 2011, through August 15, 2012. Electrical over-stress of a resistor in the occupant restraint control module may lead to the non-deployment of the active head restraints during a rear impact collision.
Component
ELECTRICAL SYSTEM
ModelYear
2011
Conequence
In the event of a crash necessitating the deployment of the active head restraints , their non-deployment could increase the risk of injury.
Manufacturer
Chrysler Group LLC
ReportReceivedDate
02/07/2013
NHTSACampaignNumber
13V282000
If you were injured in an incident involving #KEN918 or any other vehicle in Vermont, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Vermont Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process