#A852JL License Plate
2001 TOYOTA Sequoia
Utah, US
Rate Driver
0
0
Overview
The license plate number #A852JL belongs to a TOYOTA Sequoia (2001 model) and is registered in Utah as a multipurpose passenger vehicle (mpv) manufactured by TOYOTA MOTOR MANUFACTURING, INDIANA, INC.. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #A852JL was first searched on LookupAPlate on July 16, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
TOYOTA
Manufacturer Name
TOYOTA MOTOR MANUFACTURING, INDIANA, INC.
Model
Sequoia
Model Year
2001
Plant City
PRINCETON
Series
UCK45L
Trim
Limited
Vehicle Type
MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country
UNITED STATES (USA)
Plant Company Name
Toyota Motor Manufacturing, Indiana, Inc.
Plant State
INDIANA
Series2
Wagon body style
Engine
Engine Number of Cylinders
8
Displacement (CC)
4663
Displacement (CI)
284.55
Displacement (L)
4.7
Engine Stroke Cycles
4
Engine Model
2UZ-FE
Fuel Type - Primary
Gasoline
Valve Train Design
Dual Overhead Cam (DOHC)
Engine Configuration
V-Shaped
Fuel Delivery / Fuel Injection Type
Sequential Fuel Injection (SFI)
Engine Brake (hp) From
240
Cooling Type
Water
Engine Brake (hp) To
284
Engine Manufacturer
Toyota
Exterior Body
Body Class
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Doors
5
Mechanical / Drivetrain
Drive Type
4WD/4-Wheel Drive/4x4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 2E: 6,001 - 7,000 lb (2,722 - 3,175 kg)
License Plate A852JL
Vehicle ownership information for the 2001 TOYOTA Sequoia with license plate A852JL may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#A852JL. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 3 recalls
EXTERIOR LIGHTING (06E049000)
Received on 24/05/2006
Make
TOYOTA
Model
SEQUOIA
Notes
THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY THE VEHICLE MANUFACTURERS. FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED "LAMP MODEL NUMBERS." CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.
Summary
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Component
EXTERIOR LIGHTING
ModelYear
2001
Conequence
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
Manufacturer
CK MOTORSPORT, INC.
ReportReceivedDate
24/05/2006
NHTSACampaignNumber
06E049000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER (07E023000)
Received on 29/03/2007
Make
TOYOTA
Model
SEQUOIA
Notes
THIS RECALL ONLY PERTAINS TO AFTERMARKET CARDONE MASTER CYLINDERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED ABOVE. CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
Remedy
CARDONE WILL NOTIFY OWNERS AND OFFER TO REPURCHASE ANY DEFECTIVE MASTER CYLINDERS. THE RECALL BEGAN DURING APRIL 2007. OWNERS CAN CONTACT CARDONE AT 1-800-777-4780.
Summary
CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
ModelYear
2001
Conequence
LOSS OF BRAKE FLUID CAN RESULT IN POOR BRAKING PERFORMANCE, POSSIBLY RESULTING IN A VEHICLE CRASH.
Manufacturer
CARDONE INDUSTRIES, INC.
ReportReceivedDate
29/03/2007
NHTSACampaignNumber
07E023000
WHEELS (02V129000)
Received on 01/05/2002
Make
TOYOTA
Model
SEQUOIA
Notes
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Remedy
OWNERS WILL BE PROVIDED WITH A CAUTION LABEL AND AN INSERT FOR THEIR OWNER'S MANUAL. OWNER NOTIFICATION BEGAN JULY 15, 2002. OWNERS WHO DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SOUTHEAST TOYOTA AT 1-800-301-6859.
Summary
ON CERTAIN 4X2 VEHICLES EQUIPPED WITH AN ALLOY WHEEL TIRE UPGRADE (OPTIONS WM4, WM8, ZL1-ZL4, DH4, OR DH5) INSTALLED BY THE PROCESSING CENTERS IN JACKSONVILLE, FLORIDA OR COMMERCE, GEORGIA, A LABEL IDENTIFYING THE SPARE TIRE AS A TEMPORARY USE SPARE TIRE WAS NOT INSTALLED. THE UPGRADE INCLUDES 4 LARGER SIZE TIRES WITH ALLOY WHEELS. THE ORIGINAL SPARE TIRE/STEEL WHEEL IS NOT PART OF THE UPGRADE AND WAS NOT CHANGED.
Component
WHEELS
ModelYear
2001
Conequence
DIFFERENT OPERATING CHARACTERISTICS CAN BE EXPERIENCED WHEN THE SPARE TIRE IS INSTALLED ON THE VEHICLE.
Manufacturer
SOUTHEAST TOYOTA DISTRIBUTORS
ReportReceivedDate
01/05/2002
NHTSACampaignNumber
02V129000
If you were injured in an incident involving #A852JL or any other vehicle in Utah, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Utah Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process