#JKA1325 License Plate
2019 JEEP Wrangler
North Carolina, US
Rate Driver
0
0
Overview
The license plate number #JKA1325 belongs to a JEEP Wrangler (2019 model) and is registered in North Carolina as a multipurpose passenger vehicle (mpv) manufactured by FCA US LLC. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #JKA1325 was first searched on LookupAPlate on September 12, 2026, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
JEEP
Manufacturer Name
FCA US LLC
Model
Wrangler
Model Year
2019
Plant City
TOLEDO
Trim
Unlimited Sport
Vehicle Type
MULTIPURPOSE PASSENGER VEHICLE (MPV)
Plant Country
UNITED STATES (USA)
Plant Company Name
Toledo North Assembly
Plant State
OHIO
Series2
Open Body
Engine
Engine Number of Cylinders
4
Displacement (CC)
2000.0
Displacement (CI)
122.04748818946
Displacement (L)
2.0
Fuel Type - Primary
Gasoline
Engine Configuration
In-Line
Engine Brake (hp) From
270
Turbo
Yes
Engine Manufacturer
FCA
Exterior Body
Body Class
Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
Doors
4
Mechanical / Drivetrain
Drive Type
4WD/4-Wheel Drive/4x4
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Gross Vehicle Weight Rating To
Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Interior
Steering Location
Left-Hand Drive (LHD)
Mechanical Brake
Brake System Type
Hydraulic
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
Active Belts
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate JKA1325
Vehicle ownership information for the 2019 JEEP Wrangler with license plate JKA1325 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#JKA1325. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 6 recalls
STRUCTURE:FRAME AND MEMBERS (18V675000)
Received on 28/09/2018
Make
JEEP
Model
WRANGLER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.
Summary
Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.
Component
STRUCTURE:FRAME AND MEMBERS
ModelYear
2019
Conequence
An unexpected reduction in steering ability, can increase the risk of a crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
28/09/2018
NHTSACampaignNumber
18V675000
STEERING (19V201000)
Received on 14/03/2019
Make
JEEP
Model
WRANGLER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.
Summary
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.
Component
STEERING
ModelYear
2019
Conequence
If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
14/03/2019
NHTSACampaignNumber
19V201000
SEAT BELTS (20V580000)
Received on 24/09/2020
Make
JEEP
Model
WRANGLER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Summary
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Component
SEAT BELTS
ModelYear
2019
Conequence
In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
24/09/2020
NHTSACampaignNumber
20V580000
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA (20V191000)
Received on 02/04/2020
Make
JEEP
Model
WRANGLER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
Summary
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Component
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
ModelYear
2019
Conequence
The lingering rearview image can distract the driver, increasing the risk of a crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
02/04/2020
NHTSACampaignNumber
20V191000
POWER TRAIN:CLUTCH ASSEMBLY (21V028000)
Received on 28/01/2021
Make
JEEP
Model
WRANGLER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Summary
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Component
POWER TRAIN:CLUTCH ASSEMBLY
ModelYear
2019
Conequence
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Manufacturer
Chrysler (FCA US, LLC)
ReportReceivedDate
28/01/2021
NHTSACampaignNumber
21V028000
POWER TRAIN:CLUTCH ASSEMBLY (20V124000)
Received on 03/03/2020
Make
JEEP
Model
WRANGLER
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Summary
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Component
POWER TRAIN:CLUTCH ASSEMBLY
ModelYear
2019
Conequence
The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Manufacturer
Chrysler (FCA US LLC)
ReportReceivedDate
03/03/2020
NHTSACampaignNumber
20V124000
If you were injured in an incident involving #JKA1325 or any other vehicle in North Carolina, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated North Carolina Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process