#KNM3817 License Plate
2011 BMW 535i
New York, US
Rate Driver
0
0
Overview
The license plate number #KNM3817 belongs to a BMW 535i (2011 model) and is registered in New York as a passenger car manufactured by BMW AG. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #KNM3817 was first searched on LookupAPlate on April 10, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
BMW
Manufacturer Name
BMW AG
Model
535i
Model Year
2011
Plant City
DINGOLFING
Series
5-Series
Trim
xDrive
Vehicle Type
PASSENGER CAR
Plant Country
GERMANY
Engine
Engine Number of Cylinders
6
Displacement (CC)
2979.1682352
Displacement (CI)
181.8
Displacement (L)
3.0
Fuel Type - Primary
Gasoline
Engine Brake (hp) From
300
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Mechanical / Drivetrain
Drive Type
AWD/All-Wheel Drive
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Pretensioner
Yes
Seat Belt Type
Manual
Other Restraint System Info
Head Inflatable Restraint for Driver, Front Passenger, Rear Outboard Driver-side and Rear Outboard Passenger-side. Knee Inflatable Restraint for Driver and Front Passenger. Pretensioners for Driver and Front Passenger.
Active Safety System
Tire Pressure Monitoring System (TPMS) Type
Direct
License Plate KNM3817
Vehicle ownership information for the 2011 BMW 535i with license plate KNM3817 may be available through our data partner. Availability is subject to applicable laws and the third party’s terms.
There are no reports against the license plate
#KNM3817. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 4 recalls
POWER TRAIN:DRIVELINE:CONSTANT VELOCITY JOINT (17V067000)
Received on 02/02/2017
Make
BMW
Model
535I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will inspect the rear driveshaft CV joint and, based on its production date, will replace it, free of charge. The recall began April 21, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2011-2012 135i Coupe, 1 Series M Coupe and 135i Convertible vehicles, 2011 Z4 sDrive 35i, 335i, 335d, 335i Coupe, 335is Coupe, 335i Convertible, 335is Convertible, 535i, 535i xDrive, 535i Gran Turismo and 550i xDrive Gran Turismo vehicles and 2012 740i and 740Li vehicles. The rear driveshaft constant velocity (CV) joint on the affected vehicles may fatigue and break.
Component
POWER TRAIN:DRIVELINE:CONSTANT VELOCITY JOINT
ModelYear
2011
Conequence
If the CV joint breaks, the vehicle may have a loss of propulsion, increasing the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
02/02/2017
NHTSACampaignNumber
17V067000
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE (16V832000)
Received on 17/11/2016
Make
BMW
Model
535I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the SCU, free of charge. The recall began on December 16, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2011 BMW 528i, 528xi, 535i, 535xi, 550i and 550xi vehicles manufactured March 1, 2010, through August 31, 2011. The affected vehicles may have received a replacement Sensor Cluster Unit (SCU) during a service visit. These SCUs have an acceleration sensor that may have been incorrectly programmed and, as a result, the SCU may not accurately determine if activation and deployment of the air bags, safety belt pre-tensioners and head restraints is necessary in the event of a crash.
Component
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE
ModelYear
2011
Conequence
Depending on the severity of the crash, inadequate activation of the driver and/or passenger air bags, safety belt pre-tensioners and active head restraints may increase the risk of injury.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
17/11/2016
NHTSACampaignNumber
16V832000
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP (16V746000)
Received on 17/10/2016
Make
BMW
Model
535I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i xDrive, 550i and 550i xDrive and 2012 535i ActiveHybrid, 640i Convertible, 650i Convertible, 650i xDrive Convertible, 650i Coupe and 650i Coupe xDrive vehicles. The affected vehicles have in-tank fuel pumps that may have insufficiently crimped wire contacts.
Component
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
ModelYear
2011
Conequence
The loose wires may cause the connector to melt, resulting in a fuel leak. Additionally, the fuel pump may stop working, possibly causing an engine stall and increase the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
17/10/2016
NHTSACampaignNumber
16V746000
ENGINE AND ENGINE COOLING:ENGINE (14V176000)
Received on 10/04/2014
Make
BMW
Model
535I
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i Sedan, 535i xDrive Sedan, X3 xDrive 28i, and X3 xDrive 35i, 2010 X3 xDrive 30i, and X5 xDrive 30i, 2012 640i Coupe, and 640i Convertible and 2010-2012 535i Gran Turismo vehicles. In the affected vehicles, the bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and may possibly break.
Component
ENGINE AND ENGINE COOLING:ENGINE
ModelYear
2011
Conequence
If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
10/04/2014
NHTSACampaignNumber
14V176000
If you were injured in an incident involving #KNM3817 or any other vehicle in New York, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated New York Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process