#105RSG License Plate
2000 BMW 325Ci
Wisconsin, US
Rate driver
0
0
Overview
The license plate number #105RSG belongs to a BMW 325Ci (2000 model) and is registered in Wisconsin as a passenger car manufactured by BMW AG. The vehicle has a standard license plate attached to the front and rear of the vehicle. The license plate #105RSG was first searched on LookupAPlate on January 25, 2023, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
BMW
Manufacturer Name
BMW AG
Model
325Ci
Model Year
2000
Plant City
REGENSBURG
Series
3-Series
Vehicle Type
PASSENGER CAR
Plant Country
GERMANY
Make ID
452
Model ID
2762
Manufacturer ID
966
Engine
Engine Number of Cylinders
6
Displacement (CC)
2494.1111408
Displacement (CI)
152.2
Displacement (L)
2.5
Fuel Type - Primary
Gasoline
Engine Manufacturer
BMW-AG
Exterior Body
Body Class
Coupe
Doors
2
Passive Safety System / Air Bag Location
Front Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
Driver and Passenger Dual-Stage Advanced Supplemental Restraint System (SRS)
Internal
NCSA Body Type
2-door sedan,hardtop,coupe
NCSA Make
BMW
NCSA Model
3-series
License Plate 105RSG
The vehicle owner's information for the 2000 BMW 325Ci with license plate 105RSG may be available through our data provider. Click the button below to start your free search.
There are no reports against the license plate
#105RSG. Feel free to add your feedback
under the "Add Report" tab.
Showing 3 recalls
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (21V401000)
Received on 27/05/2021
Make
BMW
Model
325CI
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Remedy
Dealers will replace the driver-side air bag inflator with a newly designed inflator, free of charge. Owner notification letters were mailed on July 12, 2021. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2000
Conequence
The inflator could explode during air bag deployment, resulting in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
27/05/2021
NHTSACampaignNumber
21V401000
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE (19V853000)
Received on 26/11/2019
Make
BMW
Model
325CI
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW notified owners, and Dealers will replace the driver air bag inflators, free of charge. The recall began November 10, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.
Component
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
ModelYear
2000
Conequence
In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Manufacturer
BMW of North America, LLC
ReportReceivedDate
26/11/2019
NHTSACampaignNumber
19V853000
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE (20V018000)
Received on 15/01/2020
Make
BMW
Model
325CI
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
BMW will notify owners, and dealers will replace the passenger's front air bag, free of charge. The recall began February 13, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Summary
BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Component
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
ModelYear
2000
Conequence
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Manufacturer
BMW of North America, LLC
NHTSAActionNumber
EA15001
ReportReceivedDate
15/01/2020
NHTSACampaignNumber
20V018000