#JML5131 License Plate
2018 NISSAN Altima
Ohio, US
Rate driver
0
0
Overview
The license plate number #JML5131 belongs to a NISSAN Altima (2018 model) and is registered in Ohio as a passenger car manufactured by NISSAN NORTH AMERICA, INC.. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #JML5131 was first searched on LookupAPlate on January 11, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
NISSAN
Manufacturer Name
NISSAN NORTH AMERICA, INC.
Model
Altima
Model Year
2018
Plant City
SMYRNA
Vehicle Type
PASSENGER CAR
Plant Country
UNITED STATES (USA)
Plant Company Name
Nissan North America Inc.
Plant State
TENNESSEE
Base Price ($)
23260
Engine
Engine Number of Cylinders
4
Displacement (CC)
2500.0
Displacement (CI)
152.55936023683
Displacement (L)
2.5
Fuel Type - Primary
Gasoline
Engine Configuration
In-Line
Top Speed (MPH)
130
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Mechanical / Drivetrain
Drive Type
4x2
Axles
2
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Wheel Base (inches) From
109.3
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Interior / Seat
Number of Seats
5
Number of Seat Rows
2
Interior
Steering Location
Left-Hand Drive (LHD)
Passive Safety System / Air Bag Location
Curtain Air Bag Locations
1st and 2nd Rows
Front Air Bag Locations
1st Row (Driver and Passenger)
Side Air Bag Locations
1st Row (Driver and Passenger)
Passive Safety System
Seat Belt Type
Manual
Other Restraint System Info
2nd row outboard and center 3-point manual belts
Active Safety System
Anti-lock Braking System (ABS)
Standard
Electronic Stability Control (ESC)
Standard
Traction Control
Standard
Tire Pressure Monitoring System (TPMS) Type
Direct
Active Safety System Note
Rear Cross Traffic Alert: Standard for 2.5 S, 2.5 SV and 2.5 SL trims; Blind Spot Detection: Standard for 2.5 SV and 2.5 SL trims; Daytime Running Lights: Standard for 2.5 SL trim; Adaptive Cruise Control: Optional for 2.5 SL
Auto-Reverse System for Windows and Sunroofs
Standard
Keyless Ignition
Standard
Active Safety System / Forward Collision Prevention
Crash Imminent Braking (CIB)
Standard
Forward Collision Warning (FCW)
Standard
Dynamic Brake Support (DBS)
Standard
Active Safety System / Backing Up and Parking
Backup Camera
Standard
Exterior / Wheel tire
Number of Wheels
4
License Plate JML5131
The vehicle owner(s) information for the 2018 NISSAN Altima with license plate JML5131 may be available through our data provider. Click the button below to start your free search.
There are no reports against the license plate
#JML5131. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 2 recalls
LATCHES/LOCKS/LINKAGES:HOOD:LATCH (20V315000)
Received on 28/05/2020
Make
NISSAN
Model
ALTIMA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Nissan will notify owners, and dealers will install a stronger release spring in the hood release lever, a warning label near the secondary hood latch, and an Owners Manual addendum card with instructions on how to lubricate and maintain the secondary hood latch mechanism, free of charge. Owner notification letters were mailed June 30, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Note: Recall 16V-029 remains open for any unremedied 2013-2015 Altimas and this recall applies to all vehicles covered by 16V-029 even if those repairs have already been performed.
Summary
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2018 Nissan Altima vehicles. If the primary hood latch is inadvertently released, there is an increased likelihood that the secondary hood latch may corrode over time.
Component
LATCHES/LOCKS/LINKAGES:HOOD:LATCH
ModelYear
2018
Conequence
Corrosion to the secondary latch may cause it to bind and remain in the unlatched position when the hood is closed. If the primary latch is inadvertently released again and the secondary latch is not engaged, the hood could unexpectedly open while driving, increasing the risk of a vehicle crash.
Manufacturer
Nissan North America, Inc.
ReportReceivedDate
28/05/2020
NHTSACampaignNumber
20V315000
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA (19V654000)
Received on 12/09/2019
Make
NISSAN
Model
ALTIMA
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Remedy
Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.
Summary
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Component
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
ModelYear
2018
Conequence
The lack of an image in the back-up camera display increases the risk of a crash.
Manufacturer
Nissan North America, Inc.
ReportReceivedDate
12/09/2019
NHTSACampaignNumber
19V654000